Active Member
|
[China]
Address: The Third Industrial Area,Jingshan Village,Chashan Town,Dongguan City ,China
Contact name:
Dongguan Xinbao Instrument Co., Ltd. |
|
|
Corrosion Resistance Salt Spray Test Chamber , Electronic Cyclic salt fog Tester
Introduction
Corrosion Resistance Salt Spray Test Chamber , Electronic Cyclic salt fog Tester is used for a variety of surface treatment, including metal plating, coatings,organic and inorganic coating, anodizing, anti-rust oil, chemical corrosion resistance, and then to finished products for a long time corrosion resistance.
Specification
| Model | XB-OTS-60 | XB-OTS-90 | XB-OTS-120 | XB-OTS-160 | XB-OTS-200 |
| Inner size (cm) | 60x45x40 | 90x60x50 | 120x80x50 | 160x100x50 | 200x100x50 |
| External size(cm) | 107x60x118 | 141x88x128 | 190x110x140 | 230x120x140 | 270x150x150 |
| Inside temp | Brine test method(NSS ACSS)50°C±1°C Corrosion resistance test method. | ||||
| (CASS)50°C±1°C | |||||
| Brine temp | 35°C±1°C 50°C±1°C | ||||
| Test chamber volume | 108L | 270L | 480L | 800L | 1000L |
| Brine chamber volume | 15L | 25L | 40L | 40L | 40L |
| Compressed air pressure | 1.00±0.01kgf/cm2 | ||||
| Spray volume | 1.0~2.0ml/80cm2/h (Collect at least 16 hours, the average) | ||||
| Test room relative humidity | 85%RH or more | ||||
| PH | 6.5~7.2 or 3.0~3.2 | ||||
| Spray method | Programmable spray (including the continuous spray interrupted spray) | ||||
| Protective system | 1.The over temperature of whole machine. | ||||
| 2.Automatically cut the power off when the water level of test chamber or pressure bucket is below the standard. | |||||
| 3. The entire machine is set with a timer and alert of overflow, electronic leakage, light circuit. | |||||
| Warranty | 12+2month(in view of transportation ,Customs be 2month),maintenance for lifelong | ||||
Design Standard:
GB-T2423.17-1993 Humidity and salt spray test
GB/T 12967.3-91 CASS test
ASTM.B117-97 Humidity and salt spray test
GB/T 10125-2012 Corrosion tests in artificial atmospheres; Humidity and salt spray test
* GB/T 2423.18-2000 *GB/T 10125-1997 ASTM.B117-97
*JIS H8502 *DIN50021*JIS Z2371 * IEC68-2-11*QJ 2027-1990
*IEC68-2-52 1996 *GB.10587-89 *EN 14147*SH/T 0081-1991
*CNS.4158 * CNS.4159 CASS*GB/T 12967.3-91 CASS
Thermostatic control can be set under CNS, JIS, ASTM standard:
Ⅰ Humidity and salt spray test: NSS,ACSS
1) Temperature of test box: 35℃±1℃
2) Temperature of pressure bucket: 47℃±1℃
Ⅱ Corrosion resistance test: CASS
1) Temperature of test box: 50℃±1℃
2) Temperature of pressure bucket: 63℃±1℃
Supply system: the pressure is 1kg/cm²
Spray measurement 1-2mI(mI/80cm²/h)(average in 16 hours)
Spray way: Continuously.
Features:
A. The whole part of the device is made of P.V.C. Sheet and the
inside of the device is reinforced by using a special lining
material. Hence, it is sturdily made and will not transform
forever.
B. The test chamber is heated from five directions in order to
ensure the temperature difference in the chamber may be kept within
(± 1℃).
C. Spray nozzle: The nozzle is specially made to enable it to suck
up the salt water and then spray it out in the shape of mist with
considerable high speed. When it falls on the surface of the item
being tested, the difference of fallen mist may be controlled
within ± 0.3ml / 80 cm2h.
D. HUNTER PRINCIPLE is used to make the saturated air hot and moist
and to keep the humidity in the test chamber required for test.
E. Temperature is the pre-requisite condition that with have direct
impact on corrosion rate. We use P.I.D. temperature control unit to
limit the temperature difference within the range of ± 0.5℃.
F. A warning device is used to indicate the low level of the test
fluid, when the fluid is only enough for being sprayed for five
hours, a buzzer will remind the user to replenish the liquid to
ensure continuous spray test.
G. Use full automatic detecting system, test stopped automatic, and
lighting display when trouble.
Please feel FREE to contact us if you have any needs.
Custom-made ASTM B117 NSS AASS CASS Salt fog Cabinet , salt spray test chamber
