Programmable UV Testing Equipment , Accelerating Aging Tester Plastic Testing

Programmable UV Aging Test Chamber , Accelerating Aging Tester for Plastic testing
 
Introduction 

Programmable UV Aging Test Chamber , Accelerating Aging Tester for Plastic testing is designed for evaluating the resistant performance of non-metallic materials, organic materials (plastics, paints, coatings, rubbers, etc.) under the specified conditions such as sunlight, temperature, and other climatic conditions. It creates a man-made testing environment imitating the natural light source such as sunlight and other damages in the nature, such as rain and dew damage, to impose on the materials and to assess the degree of color changing and fading under the accelerated environment conditions. The chamber fully complies with the requirements of Standard GB/T16585-1996, GB14522-93, GB/T16422.3-97, ASTMG53 and etc., provides the best UV sunlight simulation and is easy to use and operate.
 

Technical Parameters :
 

 
Feature :

* Our UV aging test chamber series includes 4 different types of UV aging test boxes, QUV/se, QUV/basci, QUV/spray and QUV/cw. It can meet the testing standards of coatings, ink, adhesives, plastic products and other industries.

• Different test methods and procedures: Automatic control, real-time monitoring and display.
• The sample frame temperature: Sample temperature BPT directly display and automatic control.
• Condensation control: Condensation directly display and automatic control.
• Circular manner: Light, condensation and spray directly display and automatic control.
• Light irradiance: Testing process can be set light irradiance energy and time and monitoring.
• Spray water: Adjustable and display, automatic control, test process can be set spraying time.
• The calibration function: Automatic temperature calibration, convenient, fast.
• Alarm function: Automatic alarm .
• Water supply way: Automatic feed water.
• PC connection method : RS232

Standard

1. ISO 48-3-2006, Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps;
2. ASTM D4329-2005, Standard Practice for Fluorescent UV Exposure of Plastics;
3. ASTM D4587-2005, Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings;
4. ASTM D5208-2001, Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics, etc.
 
Safety Devices:

Leakage protection
Power overload protection
Over-temperature protection
Voice alarm
Lack of water, ground protection
 
Equipment Conditions Of Use

1, ambient temperature: 5 ℃ ~ +32 ℃;
2, humidity: ≤ 85%;
3, Power requirements: AC220 (± 10%) V/50HZ One phase
4, pre-installed capacity: 5KW
 

 
 
 

UVA UVB Light Fastness Aging Test Chamber , UV Accelerated Weathering Tester
UVA UVB Light Fastness Aging Test Chamber , UV Accelerated Weathering Tester