Active Member
|
[China]
Address: No.7 YingXing Middle Road, Donghuan Street, Shiqiao, Panyu District, Guangzhou
Contact name:Jody Peng
Guangzhou JASU Precision Machinery Co., LTD |
|
|
The final bottles are of top-grade and exquisite, with uniform wall
thickness, clear surface and almost invisible parting line.
Ensured flatness of both mouth and high precision of the thread of
bottle neck, without any scrap or scratches.
Fixed orientation: ISBM machine could make bottles with the same
orientation of screw, which could make the closures (screw cap,
flip caps, pump, etc.) pointing in the same direction.
Shaping ability: the preform remains warm during the process, which
could present a better shaping ability, a sharper angle.
Adopted PID control achieves precise and steady temperature for the
material barrel and hot runner.
Modular design so only need to change the mold to make a new
machine and produce new style bottles.
Hot runner with valve gate type, designed with special anti-leak
device, is adopted for higher preform gate finishing.
Less transmission and working procedure save the products from damp
and pollution so the hygienic requirement especially for food grade
bottles is well guaranteed.
Data Sheet of JASU Injection Stretch Blow Molding Machine (ISBM)
| Item | Unit | Machine Type | ||
| ISB 1100AN-3 | ||||
| Injection Part | Screw Diameter | mm | 50 | |
| Screw L/D Ratio | L/D | 24:1 | ||
| Screw Speed | r/min | 0-150 | ||
| Theoretical Injection Capacity | cm3 | 481 | ||
| Injection Pressure | MPa | 176 | ||
| Max. Hydraulic Pressure | Kg/cm | 140 | ||
| The Actual Injection Quantity | g(ps) | 452 | ||
| Oz | 16 | |||
| Screw Stroke | mm | 245 | ||
| Clamping Part | Blow Clamping Force | KN | 150 | |
| Clamp Tonnage | KN | 600 | ||
| Wheel Diameter | mm | 1100 | ||
| Max. Height | PP, PET, PETG, Tritan, PS, PC | mm | 200 | |
| PC, PETG, Tritan, PS | mm | 220 | ||
| Open Vertical Mode Trip | mm | 570 | ||
| Others | Max. Pump Pressure | MPa | 16 | |
| Servo Motor | Kw | 22 | ||
| Mode Opening/Locking Motor (Double Pump) | Kw | 22 | ||
| Electric Power | Kw | 12.2 | ||
| Tank Volume | L | 420 | ||
| Dimension of Machine | m | 4.5*1.95*3.4 | ||
| Machine Weight | T | 9 | ||
| --Parameters are subject to change without prior notice. --Providing PC, PET, PP, PS, PETG, TRITAN screw barrels according to customers' requirements. | ||||
PET Bottle Molding Machine / Single Stage Blow Machine is widely used for various plastic materials and has broad application prospects
Shapes: cylinder, jar, oblong, square, plain round, wide-mouth, oval, non-round, ultra-light etc.
A large range of refined and essential designed platic blow molded bottles and jars are available from size 10ml to 2500ml.
1. Food and beverage bottles such as jar, can, tin, kettle, cruet
etc.
2. Cosmetic and detergent bottles such as hand washing liquid
bottle,shower gel bottle, perfume bottle etc.
3. Pharmacy bottle such as hand disinfectant bottle, medicine
bottle, eyedropper bottle, oral liquid bottle etc.
4. Baby feeding bottle and sports bottle such as student bottle,
vacuum bottle, juice bottle, baby feeding bottle etc.
5. PC bottle and wine goblet such as water bottle,juice jug,beer
jug,milky tea jug, wine jug etc.
6. Lampshade,lamp chimney,LED bulb housing,big safety bulb
housing,irregular bulb housing Φ30-Φ80, Φ80-Φ300, lotus bulb
housing etc.
7. Jerry cans,other irregular plastic bottles and irregular plastic
containers etc.
Why JASU Precision Machinery?
We are THE FIRST to manufacture One Stage Injection Stretch Blow Molding Machine in China on basis of digestion and absorption of the advanced technology from
Japan and Germany.
Manufacturer/Direct Factory with production base takes 24000m2.
Own highly qualified technical staffs (20-30 persons) and R/D
center.
Obtained a number of technical patents.
Market network throughout the country , and export to many
countries of East Europe, South America, South Africa etc.
Our machine enjoyed high reputation among customers.
Overseas sales increase 33% annually.
Service technicians (holding visa and passport) are on call and
able to serve on site and instruct via voice and videos.
Question & Answer
Q1: Are you a factory or trading company?
A1: We are established in 2003, a actual factory and manufacturer
in the line of injection blow molding machine for 18 years.
Q2: Where is your factory located? How can I visit you?
A2: Our factory is located in Panyu District, Guangzhou, Guangdong
Province, China, about 48 minutes by high-speed railway from Hong
Kong.
5 minutes driving away from Shiqiao subway station.
We can book hotel for you and pick you up from CAN BAIYUN airport
or Guangzhou south railway station.
Q3: How about the payment term?
A3: Advancement (subject to our marketing strategy and both
parties' discussion) and settle the balance payment prior to
delivery.
Q4: What about your main market?
A4: Our machines were sold well in China, also exported and enjoyed
a good reputation among customers from Europe, Russia, Southeast
Asia, Middle and South America, Africa etc.
Our customers widely spread over Russia, Italy, Poland, Turkey,
Netherlands, Sweden, Bulgaria, Brazil, Ecuador, Thailand, India,
Myanmar, Malaysia, Vietnam, Cambodia, Egypt, Algeria, South Africa,
Ivory Coast, Philippines, Bangladesh......
Q5: How does your factory do regarding quality?
A5: Quality is the most important principle. JASU people always
attach great importance to quality controlling from the very
beginning to the very end. Our factory has passed ISO and CE
certification. Patents and many other certificates obtained also
tells this.
Q6: What about warranty and do the engineers available to overseas?
A6: One year warranty. During this period, if you need any support
on installation, adjustment , operation or maintenance, our
engineers can go abroad to fix for you.
Q7: Others?
A7: We will request the working voltage and power frequency at the
buyer's side when he placing the order.
Each order will be fulfilled as a turn key project of machine.
