Active Member
|
[China]
Address: No.7 YingXing Middle Road, Donghuan Street, Shiqiao, Panyu District, Guangzhou
Contact name:Jody Peng
Guangzhou JASU Precision Machinery Co., LTD |
|
|
The core component of the one-step injection (stretch) blowing process is a triangular turntable, which rotates at 120 degrees.
The plastic melt is injected into the parison under low injection pressure, and the neck of the bottle is precisely shaped.
After proper control, the mold is opened and the mandrel and parison are transferred to the stretch/blowing station.
Compressed air is then blown into the stretched parison to expand to the bottles mold.
Once the bottle is cooled the mold is opened and the finished bottle is emptied from the mold cavity.
Low risk on the mold development and testing with single machine purchase.
The one step method was preferred by jar supplier and empty bottle supplier because the entire molding process is done with only 1 machine.
The two step method requires 2 machines, one to make the preform and another one to process it, requiring more energy to operate.
Shaping ability: the preform remains warm during the process, which could present a better shaping ability, a sharper angle.
Suitable for all containers irrespective of neck design and weight, considering that there is no restriction to only the preforms available on the market.
Datum of Injection Stretch Blow Molding Machine / stretch blow molding process / PET jar blowing machine
| Item | Unit | Machine Type | ||
| ISB 1100AN-3 | ||||
| Injection Part | Screw Diameter | mm | 50 | |
| Screw L/D Ratio | L/D | 24:1 | ||
| Screw Speed | r/min | 0-150 | ||
| Theoretical Injection Capacity | cm3 | 481 | ||
| Injection Pressure | MPa | 176 | ||
| Max. Hydraulic Pressure | Kg/cm | 140 | ||
| The Actual Injection Quantity | g(ps) | 452 | ||
| Oz | 16 | |||
| Screw Stroke | mm | 245 | ||
| Clamping Part | Blow Clamping Force | KN | 150 | |
| Clamp Tonnage | KN | 600 | ||
| Wheel Diameter | mm | 1100 | ||
| Max. Height | PP, PET, PETG, Tritan, PS, PC | mm | 200 | |
| PC, PETG, Tritan, PS | mm | 220 | ||
| Open Vertical Mode Trip | mm | 570 | ||
| Others | Max. Pump Pressure | MPa | 16 | |
| Servo Motor | Kw | 22 | ||
| Mode Opening/Locking Motor (Double Pump) | Kw | 22 | ||
| Electric Power | Kw | 12.2 | ||
| Tank Volume | L | 420 | ||
| Dimension of Machine | m | 4.5*1.95*3.4 | ||
| Machine Weight | T | 9 | ||
| --Parameters are subject to change without prior notice. --Providing PC, PET, PP, PS, PETG, TRITAN screw barrels according to customers' requirements. | ||||
Semi auto PET blow moulding machine is widely used for various plastic materials and has broad application prospects
This machine is the one-step molding equipment, applicable to the thermoplastic materials such as PET, PC, PS, Tritan, PCTG, PETG, etc. and widely used in manufacture of packaging bottles for pharmaceuticals, healthcare product and cosmetic industries.
Pharmaceuticals: syrup bottles, eye drops bottles, pills bottles, oral liquid bottles, intravenous drip bottles, medicine bottle, intravenous drip bottles etc.
Cosmetic bottles: mascara bottles, lotion bottles, cream bottles etc.
Food and Dairy: Water bottles, beverage bottles, and food
packaging.
Households: households and detergent bottles, laundry bottles,
liquid soap plastic bottles containers and lotion bottles.
Baby Feeding Bottles, Spice, Liquor, Carbonated Drink, Beverage Bottles etc.
Why JASU Precision Machinery?
We are THE FIRST to manufacture One Stage Injection Stretch Blow Molding Machine in China on basis of digestion and absorption of the advanced technology from
Japan and Germany.
Manufacturer/Direct Factory with production base takes 24000m2.
Own highly qualified technical staffs (20-30 persons) and R/D
center.
Obtained a number of technical patents.
Market network throughout the country , and export to many
countries of East Europe, South America, South Africa etc.
Our machine enjoyed high reputation among customers.
Overseas sales increase 33% annually.
Service technicians (holding visa and passport) are on call and
able to serve on site and instruct via voice and videos.
Question & Answer
Q1: Are you a factory or trading company?
A1: We are established in 2003, a actual factory and manufacturer
in the line of injection blow molding machine for 18 years.
Q2: Where is your factory located? How can I visit you?
A2: Our factory is located in Panyu District, Guangzhou, Guangdong
Province, China, about 48 minutes by high-speed railway from Hong
Kong.
5 minutes driving away from Shiqiao subway station.
We can book hotel for you and pick you up from CAN BAIYUN airport
or Guangzhou south railway station.
Q3: How about the payment term?
A3: Advancement (subject to our marketing strategy and both
parties' discussion) and settle the balance payment prior to
delivery.
Q4: What about your main market?
A4: Our machines were sold well in China, also exported and enjoyed
a good reputation among customers from Europe, Russia, Southeast
Asia, Middle and South America, Africa etc.
Our customers widely spread over Russia, Italy, Poland, Turkey,
Netherlands, Sweden, Bulgaria, Brazil, Ecuador, Thailand, India,
Myanmar, Malaysia, Vietnam, Cambodia, Egypt, Algeria, South Africa,
Ivory Coast, Philippines, Bangladesh......
Q5: How does your factory do regarding quality?
A5: Quality is the most important principle. JASU people always
attach great importance to quality controlling from the very
beginning to the very end. Our factory has passed ISO and CE
certification. Patents and many other certificates obtained also
tells this.
Q6: What about warranty and do the engineers available to overseas?
A6: One year warranty. During this period, if you need any support
on installation, adjustment , operation or maintenance, our
engineers can go abroad to fix for you.
Q7: Others?
A7: We will request the working voltage and power frequency at the
buyer's side when he placing the order.
Each order will be fulfilled as a turn key project of machine.
