Results foriec 61032 test probesfrom 9181 Products.
|
|
Test Finger Probe , IEC 60335 Testing Probe Kit With Carrying Case Product information: 1.IEC Jointed Finger Probe 2.50mm Impact Test Ball 3.Test Pin Probe: short 4.Rigid Finger ...
|
|
|
|
|
Small Finger Probe 8,6 Test Probe 18 of IEC 61032 & Small Finger Probe 5,6 Test Probe 19 of IEC 61032 Conforms to: Standard IEC61032-1997, IEC60529-2001, GB/T4208-2008 and UL etc. ...
|
|
|
|
|
IEC60529 Figure 5 Hand-Held Device (Spray Nozzle) to Verify Protection Against IPX3 Spraying and IPX4 Splashing Water 1. Introduction The spray nozzle hand-held device is designed ...
|
|
|
|
|
IEC 60335 Test Finger Probe Product information: 1. IEC Jointed Finger Probe 2. 50mm Impact Test Ball 3. test Pin Probe: short 4. Rigid Finger Probe 5. Ball Pressure Tester 6. ...
china
|
|
|
|
|
IEC 62368-1 R6mm Stainless Steel Blunt Test Probe Of Figure V.3 Product information: The blunt probe of figure V.3 conforms to IEC 62368-1:2018 clause 5.3.2, 5.4.10, V.1.4 and ...
|
|
|
|
|
50mm Sphere IP1X Test Probe with Baffle and Handle Specification: IP1X Probe A /Test Probe A 1, According to: IEC 61032:1997 / IEC 60529:2001 and UL; 2, Test Probe A is necessary ...
|
|
|
|
|
IEC 62368-1 Clause V.1.3 and figure V.1 Opening Tested with Straight Unjointed Test Probe 30N Product Information: The Unjointed Test Probe conforms to the standard requirements of ...
|
|
|
|
|
50mm Sphere Test Probe A with Baffle and Handle Specification: IP1X Probe A /Test Probe A 1, According to: IEC 61032:1997 / IEC 60529:2001 and UL; 2, Test Probe A is necessary ...
|
|
|
|
|
IEC 62368-1 Clause V.1.2 and Figure V.2 Jointed Test Probe for Equipment Product information: This is a precision test finger made in accordance with many standards like IEC 62368...
|
|
|
|
|
Product Description Consists of five test probe: 1) Test Probe B of IEC 61032 2) Test Probe 13 of IEC 61032 3) IEC 60065:2005 Figure 3 - Example of ACCESSIBLE parts 4) IEC 60065...
|
|
|
|
|
IEC 62368-1 Clause 5.3.2, 5.4.10, V.1.4 and Figure V.3 Blunt Probe Product Information: Standard:The test probe is designed and manufactured according to the standard requirements ...
|
|
|
|
IEC 61032:1997 Figure 14 Milling Test Probe 31 of Access Probes to Hazardous Mechanical Parts This probe is intended to verify the protection against access to hazardous mechanical parts of the grinding system of food ...
|
|
|
|
|
IEC 61851-1 Stainless Steel Test Rod Probe D Test Probe With Alligator Clip Product overview: This rod probe is intended to verify the protection of persons against access to ...
|
|
|
|
|
IEC 61032:1997 Figure 14 Milling Test Probe 31 of Access Probes to Hazardous Mechanical Parts This probe is intended to verify the protection against access to hazardous mechanical ...
|
|
|
|
|
IEC 61032 Fig.3 Test Probe C IP3X 2.5mm Test Rod with 3N Force Basic Introduction: 1. According to: GB/T4208-2008 / IEC 61032:1997 / IEC 60529:2001 / IEC 60065 / IEC 60598 and UL 2...
|
|
|
|
|
IEC 61032:1997 Test Probe D IP4X Test Wire 1.0 mm Basic Introduction: 1. According to: GB/T4208-2008 / IEC 61032:1997 / IEC 60529:2001 / IEC 60065 / IEC 60598 and UL 2. IP4X Test ...
|
|
|
|
|
IEC 61032 Fig.4 Test Probe D IP4X 1 mm Test Wire with 3N Force Basic Introduction: 1. According to: GB/T4208-2008 / IEC 61032:1997 / IEC 60529:2001 / IEC 60065 / IEC 60598 and UL 2...
|
|
|
|
|
IEC 61032 Figure 16 Test Cone for Access Probes to Hazardous Hot or Glowing Parts This probe is intended to verify the basic protection against access to glowing heating elements. ...
|
|
|
|
IEC 61032 Test Probe 13 meets IEC CSA & UL requirements This pin probe is intended to verify the protection against access to hazardous live parts in class 0 equipment and class II equipment (see IEC60536). Conforms to: ...
|
|
|
|
|
Test Probe 12 Long Test Pin of IEC 61032 Fig. 8 / Test Probe 13 Short Test Pin of IEC 61032 Fig. 9 Appliance: It's the necessary tool to proceed protecting electric shock test of ...
|
|
|
You may also be interested in :
