Results foriec 61032 test probesfrom 9177 Products.
|
IEC 60065:2014 clause 9.1.1.3 Children Test Probe 18 Standard: Conforms to IEC 60065:2014 clause 9.1.1.3, IEC61032 figure 12 finger probe 18, IEC335.1,UL1017. Application: It is ...
|
|
|
|
Telecom Test Probe Usage: Check access to telecommunications voltages. The Telecom Access Probe is required in IEC 60950, IEC 60065, UL and CSA Standards. It is used to check ...
|
|
|
|
Product Details Telecom Test Probe Usage: Check access to telecommunications voltages. The Telecom Access Probe is required in IEC 60950, IEC 60065, UL and CSA Standards. It is ...
china
|
|
|
|
IEC 60529 Stainless Steel Test Probe C For Verifying Protection Of Water Product information: The probe complies with IEC60529 version 2.1 2001-02, IEC61032 test probe C and ...
|
|
|
|
50mm Test Ball - Test Probe 1 of IEC61032 Application: The Rigid Sphere (50mm) is designed and manufactured to perform the test specified in many standards (IEC 60335, IEC 60065, ...
|
|
|
|
IEC60335 Test Probe Kit Includes Standard Test Finger Long Pin Test Probe Test Probe 41 ect. The PG-60335 contains the probes listed in the core of the UL / IEC / EN 60335 ...
|
|
|
|
IEC 60745-2-5 Test Probe A With φ35*5 Stop Face For Circular Saws Test Test method: IEC60745-2-5 clause 19.101.2.2 The upper guard on the side opposite the motor need not ...
|
|
|
|
UL Standard / IEC 62368 -1-Figure V.1 Heat-treated steel Steel Jointed Test Probe Simulating Human Finger Movement Application: This jointed Test Finger Probe is strictly designed ...
|
|
|
|
IEC 60950-1 Clause 4.2.5 Enclosures Against Ingress Test Probe 1 Figure 5 Ф50mm Product information: This impact steel ball confirms to IEC 60950-1: 2013 Clause 4.2.5, IEC 60065...
|
|
|
|
IEC 61032:1997 Figure 14 Milling Test Probe 31 of Access Probes to Hazardous Mechanical Parts This probe is intended to verify the protection against access to hazardous mechanical ...
|
|
|
|
IEC60950 Figure 3 Test Finger Probe Telecom Test Probe End radius with R6 Product presentation of Test Finger Probe: The Telecom Test Probe is a precision tool designed for ...
|
|
|
|
IEC 60601-2-3-Figure 201. 102- Test probe
|
|
|
|
IEC 60335-1 Clause 20.2 Similar to Test Probe B but Having a Ф50mm Circular Stop Face Standards & Clauses: IEC 60335-1 clause clause 20.2. IEC61032:1997 “Protection of persons and ...
|
|
|
|
The Rigid Test Finger is a precision test probe made according to Figure 7 (Fig. 7) of the IEC 61032 (Test probe 11) and is used to simulate a human finger. It is also used by the ...
|
|
|
|
IEC 60529 IP Testing Equipment Test Probe C for IP3 and Protection against contact hazards Product Introduction for IP Testing Equipment: The 2.5mm test rod conforms to IEC61032 ...
|
|
|
|
IEC 60065:2014 Clause 9.1.7 Enclosure Openings Unjointed Test Probe 11 Product Overview: This probe conforms to the standard requirements of IEC 60065:2014 clause 9.1.7, IEC61032 ...
|
|
|
|
IEC 60065:2014 clause 9.1.1.3 Children Test Probe 19 Standard: Conforms to IEC 60065:2014 clause 9.1.1.3, IEC61032 figure 13 finger probe 19, IEC335.1,UL1017. Application: It is ...
|
|
|
|
IEC60529 IP2 Ingress Protection Test Equipment Test probe 2 - 12.5mm steel ball IEC60335-1 Clause 22.1: If the appliance is marked with the first numeral of the IP system or any of ...
|
|
|
|
IEC 60065 clause 9.1.1.2 Short Test Probe HT-I09 Standard: Conforms to IEC 60065 clause 9.1.1.2, IEC61032 figure 9 Test probe13, IEC60950 figure 2B, IEC60335 and IEC60065. ...
|
|
|
|
IEC62368 Jointed Test Probe / Finger Length 80mm Diameter 12mm Standard: Conforms to IEC 62368-1:2018 clause 5.3.2, T.3 and Figure V.2, IEC61032 figure 2 test probe B,IEC950 ...
|
|
|
You may also be interested in :