Fast Charging Motor Battery Charger HAS-Q-619K Silver Color Manual Adjustable/Full Automatic Battery Rejuvenator

Fast Charging Motor Battery Charger HAS-Q-619K Silver Color Manual Adjustable/Full Automatic Battery Rejuvenator

Product Description:

Pulse battery charger is our factory according to lead-acid battery, maintenance-free battery, start battery, start-stop battery,12V24VBattery,12.6V lithium battery and professional design and

production.

It adopts a dedicated intelligent microcomputer chip to control the whole process, and adopts advanced pulse width modulation technology. It has small size, safe and convenient,and high efficiency conversion, stable output current, large design capacity, can be operated at full load for a long time and so on. It is a new generation of eco-friendly chargers.

The charger has short-circuit protection, reverse polarity protection, overtemperature protection, and low-voltage protection. It can realize constant current, constant voltage, floating, trickle and other charging states.Improve battery life. Reduce the rate of battery water loss and eliminate battery heating and drum charging.

Feature:

1. Multi-function charger is widely used in 12v/24v battery, it can identify different kind of batteries in automatically

2. Multi-function charger Use the advanced pulse width modulation technology with three-stage battery charge in automatic function

3. Microcomputer power chip digital pulse restore to improving the battery life greatly.

4. With multiple protection.

5. Output short circuit protection & Overheating protect & Reverse connecting protection & Over current protection & Full charging automatic shutdown protection

6. Intelligent charge and fast charge for opton

7. With Digital LED Display window show the charge voltage/Current

Function:

1. It can charge lead-acid batteries, water batteries, dry batteries, maintenance-free batteries -12V lithium batteries;

2. Detect battery internal pressure;

3. Automatically identify 12V24V batteries;

4. Power 400W, maximum current 30A;

5. Rechargeable below 400AH Battery, recommended below 300AH

Operation:

Step 1: Check the current voltage of the battery to be charged.

Step 2: Whether the output voltage of the charger matches.

Step 3: Connect the charger and the battery to be charged correctly as required.

Step 4: Check that the mains voltage matches the charger's rated input voltage.

Step 5: Connect the power and connect the battery, observe whether the indicator light is on, and whether the cooling fan is working when charging.

Step 6: If the charger is not working properly, quickly disconnect the mains and check the mains, battery and all connections. (Please contact customer service in time)

Troubleshooting:

It is shown full when charger to the battery charging time of few minutes

1. Check if the charger is observing the wind due to over current protection or low voltage protection(mismatch voltage). Or whether the fan is working.

2. Indicate that the battery has no capacity or is fully charged(it is recommended to discharge the battery before testing.) Or replace the battery test with another lack of power.

3. Check whether the charger output clip is in good contact with the battery output column.

The battery housing heats up when charging the battery or the charger does not show fully for a long time

1. Check whether the battery has a short circuit phenomenon,resulting in the charging voltage can not reach the rated voltage of the charger for a longtime.

2. Whether the battery already has leakage≥0.3 current.

3. Battery process, unqualified. It is recommended to replace the genuine battery.

4. Replace the good battery test.

Charger charged at normal connection time, buzzer alarm or not working at all

1. Check if the battery is badly powered,causes the charger to be protected against low voltage.

2. The battery is shelved for a longtime or the battery is seriously short-circuited.

3. Whether there is still a beep alarm in the load state when connect the power supply.

4. It is recommended replace the good battery test.

Safety Precautions:

1. It is strictly prohibited to use the machine in the environment of humidity, high temperature, flammable and explosive substances or gases!

2. It is strictly prohibited to block the machine cooling air holes or fan damage in the state of use of the machine.

3. Strictly prohibited to the scrap, non-lead-acid batteries, or no voltage battery charging! Prohibit charging of non-rechargeable batteries! This charger is prohibited to charge lithium batteries, charging is prohibited near open flames! High voltage inside the machine is strictly prohibited to disassemble!

4 For indoor use, beware of rain. Charging process, must be guarded, charger is strictly prohibited to cover, must be placed in a well-ventilated place to use. It is strictly prohibited to be placed in the car or car charging, Road to prevent flames, Sparks and explosive gases, so as not to cause fire!

5. To charge the battery of the vehicle or equipment, please remove the battery, placed in a safe, no flammable objects around the environment for charging, otherwise accidents occur, your own responsibility!

6. The charger has a high pressure, dangerous, non-professionals are strictly prohibited to open or modify the machine, or bear the consequences!

7. If the power input cord is damaged, in order to avoid danger, it must be replaced by the manufacturer, maintenance department or similar professionals.

8. Before connecting or disconnecting the battery charger from the battery, disconnect the power supply!

Technical Parameters:

Rated input voltage range:110V-250V

Output voltage:12V/24V

Rated operating frequency:50/60HZ

Full load conversion efficiency:93%

Operating temperature range:-30°C-45°C

Charging mode:No load - constant current-constant pressure - float charge - trickle

FAQ:

Q: Why is the current getting smaller and smaller?The current is not 30A.

A: Charging principle: pulse. Pulse can protect the battery and prolong its service life.

The difference is that the pulse charger can keep the charging process dynamic, balance the charging and discharging process, reduce the water loss during the charging process, and prevent the problem of sulfation, so that the battery capacity can be restored and the battery life will be increased.

Pulse is not a constant voltage and current. It will match the charging voltage and current according to the battery status. The charging current will become smaller and smaller as the battery power increases.

The pulse is designed to better protect the battery from being injured due to overcharge.

Not all batteries can reach the peak current. If the battery capacity is large and the power loss is severe, the current will be higher.

Q: Are 12V/24V and lithium battery automatically compatible?

A: 1. Manual selection is required; 2. 12V/24V self-defined identification, lead-acid battery, water battery, dry battery. 3. Lithium battery: 12V, lithium iron phosphate battery cannot be charged (it depends on whether the charger supports 12.6V lithium battery)

Q: How to operate?

A: The first step is to check whether the battery is good or bad. Operation method: the charger is not plugged in, just clip the charger clip to the positive and negative poles of the battery. The display will show the current internal pressure of the battery. There are two conditions not shown: 1. Charger problem 2. Battery voltage is lower than 8V.

The second step is that the charger has normal input and output. Only plug in, and the display will be on. By default, 12V and POWER are on. When the red and black clips meet, the spark charger is completely normal.

Q:What is the differences between chargers?

A:1. Make sure what type of battery needs to be charged.
2.Different power sizes affect the charging time of the charger.

Q: What is the function of the charger?

A:1. Check the internal pressure of the battery; 2. Repair; 3. Charging.

Q: Why can't the battery reach the current you said?

A: Generally, the battery capacity is not large enough to give all the output current to the battery. I'm afraid that the battery can't bear it, which will make the battery damage.

P.S. Most of the batteries that need to be recharged with chargers have some problems

Q: Why cant the two 12V series connection recognize 24V for charging?

A: If the battery is a combination of two 12V batteries and can not directly identify the 24V charging, the internal pressure of the two batteries can be detected separately, and the large difference is unrecognizable. Two 12V batteries need to be charged separately

Q: Why does the display screen not light after plugging in?

A: 1.Plug in only, the display screen is not on, and the indicator light is not on. The safety tube is burnt and the product is defective

1. The 12V and power indicators are on. It may be that the display cable is loose. Maybe the display screen is broken