Jump Starter Portable Charger HAS-Q-618X 12V 6A Fast Charging Smart Battery Maintainer Trickle Charger Pulse Repair

Jump Starter Portable Charger HAS-Q-618X 12V 6A Fast Charging Smart Battery Maintainer Trickle Charger Pulse Repair

Product Introduction:

The Pulse battery charger manufactured by our factory is specifically designed for various types of batteries, including lead-acid batteries, maintenance-free batteries, start batteries, start-stop batteries, 12V and 24V batteries, and 12.6V lithium batteries.

This charger utilizes a dedicated intelligent microcomputer chip to control the entire charging process. It employs advanced pulse width modulation technology, resulting in a compact size, safety, and convenience. The charger offers high-efficiency conversion, stable output current, and a large design capacity. It can operate at full load for extended periods, making it a next-generation eco-friendly charger.

The charger incorporates several protective features such as short-circuit protection, reverse polarity protection, overtemperature protection, and low-voltage protection. It supports various charging states including constant current, constant voltage, floating, trickle, and others. These charging states help improve battery life by reducing the rate of water loss and eliminating issues like battery heating and overcharging.

Operating Mode

No-load standby: When the charger separates from the battery due to poor contact during charging or replaces another battery, the display will clearly show empty On-board standby. Standby is equivalent to about 2W energy consumption of small luminous lamps.

Constant current mode: When the battery voltage is lower than the charger's set voltage, it is a constant current charging mode, and the charger will provide a constant charging current to the battery.It has the effect of protecting the battery and charger.

Constant pressure mode: Pulse width modulation (PWM) technology is used. Precisely control the charger's charge current and output voltage to ensure that the battery is safely fully charged. It is best to avoid overcharging the battery.

Floating charge mode: When the battery is about to be fully charged, the charger does not stop charging,but still provides a constant float charge voltage and a small float charge stream to supply the battery.

Trickle mode: When the battery voltage is close to the set voltage value, the charge current gradually decreases to the set current. The charger will automatically switch from charging mode to trickle mode. Indicates that charging is complete. You can also continue to float.

Feature:

1. Multi-function charger is widely used in 12v/24v battery, it can identify different kind of batteries in automatically

2. Multi-function charger Use the advanced pulse width modulation technology with three-stage battery charge in automatic function

3. Microcomputer power chip digital pulse restore to improving the battery life greatly.

4. With multiple protection.

5. Output short circuit protection & Overheating protect & Reverse connecting protection & Over current protection & Full charging automatic shutdown protection

6. Intelligent charge and fast charge for opton

7. With Digital LED Display window show the charge voltage/Current

Safety Precautions:

1. It is strictly prohibited to use the machine in the environment of humidity, high temperature, flammable and explosive substances or gases!

2. It is strictly prohibited to block the machine cooling air holes or fan damage in the state of use of the machine.

3. Strictly prohibited to the scrap, non-lead-acid batteries, or no voltage battery charging! Prohibit charging of non-rechargeable batteries! This charger is prohibited to charge lithium batteries, charging is prohibited near open flames! High voltage inside the machine is strictly prohibited to disassemble!

4 For indoor use, beware of rain. Charging process, must be guarded, charger is strictly prohibited to cover, must be placed in a well-ventilated place to use. It is strictly prohibited to be placed in the car or car charging, Road to prevent flames, Sparks and explosive gases, so as not to cause fire!

5. To charge the battery of the vehicle or equipment, please remove the battery, placed in a safe, no flammable objects around the environment for charging, otherwise accidents occur, your own responsibility!

6. The charger has a high pressure, dangerous, non-professionals are strictly prohibited to open or modify the machine, or bear the consequences!

7. If the power input cord is damaged, in order to avoid danger, it must be replaced by the manufacturer, maintenance department or similar professionals.

8. Before connecting or disconnecting the battery charger from the battery, disconnect the power supply!

Attention:

1.Proper cooling fan operation: It is essential for the cooling fan of the charger to function correctly while charging the battery. The fan helps dissipate heat generated during the charging process, preventing overheating and ensuring safe operation.

2.Prohibited modes for lithium battery charging: When charging a lithium battery, it is important to avoid using other charging modes meant for different battery types. Charging a lithium battery with different voltage values can damage the battery. Specifically, for a 12V lithium battery, the full charge voltage should be around 12.6V±0.2V. For a 24V lithium battery, the full charge voltage should be around 25.2V±0.2V.

3.Voltage identification display range: The charger has a voltage identification display range to indicate the voltage of the battery being charged. For the 12V mode, the charger can identify and display voltages within the range of 10V-15V. In the 24V mode, the charger can identify and display voltages within the range of 20V-29V.

4.Manual monitoring for certain batteries: The first charge of a leakage battery and batteries below 20AH should be manually monitored. During this initial charge, it is important to check the battery's appearance and the battery liquid to ensure there are no signs of overcharging or deformation of the battery drum. This manual monitoring helps prevent any potential issues during the charging process.

Technical Parameters:

Rated input voltage range:110V-250V

Output voltage:12V/24V

Rated operating frequency:50/60HZ

Full load conversion efficiency:93%

Operating temperature range:-30°C-45°C

Charging mode:No load - constant current-constant pressure - float charge - trickle

FAQ:

Q: Why is the current getting smaller and smaller?The current is not 30A.

A: Charging principle: pulse. Pulse can protect the battery and prolong its service life.

The difference is that the pulse charger can keep the charging process dynamic, balance the charging and discharging process, reduce the water loss during the charging process, and prevent the problem of sulfation, so that the battery capacity can be restored and the battery life will be increased.

Pulse is not a constant voltage and current. It will match the charging voltage and current according to the battery status. The charging current will become smaller and smaller as the battery power increases.

The pulse is designed to better protect the battery from being injured due to overcharge.

Not all batteries can reach the peak current. If the battery capacity is large and the power loss is severe, the current will be higher.

Q: Are 12V/24V and lithium battery automatically compatible?

A: 1. Manual selection is required; 2. 12V/24V self-defined identification, lead-acid battery, water battery, dry battery. 3. Lithium battery: 12V, lithium iron phosphate battery cannot be charged (it depends on whether the charger supports 12.6V lithium battery)

Q: How to operate?

A: The first step is to check whether the battery is good or bad. Operation method: the charger is not plugged in, just clip the charger clip to the positive and negative poles of the battery. The display will show the current internal pressure of the battery. There are two conditions not shown: 1. Charger problem 2. Battery voltage is lower than 8V.

The second step is that the charger has normal input and output. Only plug in, and the display will be on. By default, 12V and POWER are on. When the red and black clips meet, the spark charger is completely normal.

Q:What is the differences between chargers?

A:1. Make sure what type of battery needs to be charged.
2.Different power sizes affect the charging time of the charger.

Q: What is the function of the charger?

A:1. Check the internal pressure of the battery; 2. Repair; 3. Charging.

Q: Why can't the battery reach the current you said?

A: Generally, the battery capacity is not large enough to give all the output current to the battery. I'm afraid that the battery can't bear it, which will make the battery damage.

P. S. Most of the batteries that need to be recharged with chargers have some problems

Q: Why cant the two 12V series connection recognize 24V for charging?

A: If the battery is a combination of two 12V batteries and can not directly identify the 24V charging, the internal pressure of the two batteries can be detected separately, and the large difference is unrecognizable. Two 12V batteries need to be charged separately

Q: Why does the display screen not light after plugging in?

A: 1.Plug in only, the display screen is not on, and the indicator light is not on. The safety tube is burnt and the product is defective

1. The 12V and power indicators are on. It may be that the display cable is loose. Maybe the display screen is broken