Henan Hongtai Kiln Refractory Co.,Ltd. |
Verified Suppliers
|
|
Zirconia Nozzle Inserts for Tundish Metering Nozzle
We manufacture a very wide range of high quality Zirconia Nozzle Insertss. Zirconia Nozzle Insertss are basically used for controlling the flow of steel from the Tundish to the Continuous Casting equipment. Different kind of Zirconia Nozzle Insertss include, Alumina, Alumina Carbon, Zirconia Alumina Nozzles, which are manufactured for single to multiple casting application. Alumina Carbon Zirconia Nozzle Insertss are made with Isostatic Pressing Process. which gives better performance compared to other nozzles. Zirconia Nozzles are manufactured using 65% to 95% Zirconia. it can be used where application demands Timing time upto 40hrs for Single to Multiple Casting.
Zirconia Nozzle Inserts is an important component of continuous casting. Through the
Zirconia Nozzle Inserts, the molten steel flows from the tundish
into the crystallizer. During this process, the outlet aperture
will be eroded and widened, the amount of molten steel per unit of
time increases and the surface of molten steel in the crystallizer
rises, which requires increasing casting speed to digest the excess
molten steel. With the further erode and widen of outlet aperture,
adjusting casting speed can not digest all the excess molten steel,
then releasing the excess molten steel through the mouth of the
emergency is adopted though it's a waste of steel enterprises.
Therefore, whether the outlet aperture of Zirconia Nozzle Inserts
remains constant is a most important measure of the quality.
Usually, it is measured through the total use time in actual
production.
Our Zirconia Nozzle Inserts has the properties of high
refractoriness, good resistance to erosion, and can bear rushing
scour etc.
Our customer included NEW SHALIMAR, SHALIMAR, MURTZA, PUNJAB.
ANGANG,BAOGANG.
Zirconia Nozzle Inserts for Tundish Metering Nozzle
The Zirconia Nozzle Inserts is a combination of inner core and exterior. The inner core is made of stabilized zirconia and zircon sand, producing through molding machines and high-temperature calcination. The exterior is made of zirconium and corundum, producing through molding machines and low-temperature baking. Zirconia Nozzle Inserts is located at the bottom of the tundish, it's the channel of liquid steel to flow from the tundish into the crystallizer.
Zirconia Nozzle Inserts for Tundish Metering Nozzle
Ladle Nozzle Technical Data
Model No. | SSK-1 | SSK-2 | XSK-1 | XSK-2 |
Al2O3 | 75 | 80 | 75 | 80 |
C | 6 | 6 | 6 | 6 |
Refractoriness ℃,≥ | 1790 | 1790 | 1790 | 1790 |
Bulk density g/cm³,≥ | 2.70 | 2.90 | 2.70 | 2.90 |
Apparent porosity %, ≤ | 9 | 9 | 9 | 9 |
Cold crushing strength MPa,≥ | 50 | 50 | 50 | 50 |
Zirconia Nozzle Inserts Technical Data
Item | Index | ||
Zirconium core | Coat | ||
ZF-94Z | XF-95Z | WG-65 | |
ZrO2 | 94 | 95 | - |
Al2O3+C | 0 | 0 | 65 |
Apparent porosity %, ≤ | 8 | 7 | 12 |
Bulk density g/cm³,≥ | 4.5 | 5.4 | 2.8 |
Zirconia Nozzle Inserts for Tundish Metering Nozzle
Zirconia Nozzle Inserts Features:
Long casting sequence time
Controlled casting speed
Excellent resistance to oxidation
Prevent clogging to improve productivity
Special compositions of nozzles as per use in the industry
Higher life of nozzles
Zirconia Nozzle Inserts for Tundish Metering Nozzle
Applications of the Zirconia Nozzle Inserts:
Mainly used in powder metallurgy, ferrous and non-ferrous powder
smelts, such as copper powder, nickel based alloy powder, stainless
steel powder, iron powder and other super alloy powder, etc.
According to the different requirement of different clients for the
qualities, we take the different stabilizers and grains
combination, our atomizing nozzles have higher density, excellent
high temperature erosion, crushing of metal liquids, and thermal
shock stability.
We can produce various shapes and sizes atomizing nozzle, and
individually according to clients' demand.
Zirconia Nozzle Inserts for Tundish Metering Nozzle
Packaging of Zirconia Nozzle Inserts
• different types of wood pallets and wooden case
• pallet with PE membrance and paper angel
Shipping of Zirconia Nozzle Inserts
1.Our packaging is as per customer’s request
2.Normal goods delivered by sea transport
3.Sample shipping by express
4.We will shipping and delivery goods timely, quanlity and quantity
guaranteed, and also in accordance with the contract and customer's
requirment completely.
PRE-SALES CONSULATATION
We are not only provide products,but also the use and the design of products in the kiln.We salesman are all professional experts who can give you proposals,make your energy-saving more simple.
SAMPLE SERVICE
We can provide free sample for your testing before placing orders.
PACKING
We have our own sea-worthy packing which can meet needs for mostof our clients.However,if you have spcific packing requiments,please send you reqiuments to us ,we can use your packing.
DELIVERY
We will provide surpervision on each batch of goods with report and photos.Proper logsitic method is available for different kind of products.
AFTER-SALES SERVICE
We will follow-up your response after the shipmens. If there is a complaint, we will give a proper settlement in 2 working days!