Active Member
|
[China]
Address: 1200 N Fuxing Rd Wutong District 314500 Zhejiang P. R. China
Contact name:Warren Sun
Pasia Honeycomb Products Co., Ltd |
|
|
GRANITE STONE Aluminium Honeycomb Panel With Edge Sealed For Indoor Decoration
Product Description
Travertine Stone Aluminium Honeycomb Panel With Edge Sealed For Indoor Decoration Use with Surface Polished is a type of stone honeycomb panel with a travertine stone veneer on the surface.
It is used for the traditional style building indoor decoration.There are lots of holes on the surface, so the surface is firstly filled with travertine stone powder than polished with protective film coating.
Stone Description:
Granite, the main component of the continental crust, is a type of magmatic rock that condenses beneath the surface and is a deep intrusive rock. It is mainly composed of minerals such as quartz or feldspar. The origin of granite is the Latin granum, which means grain or grain. Because granites are deep diagenetic rocks and often form well-developed, visually identifiable mineral grains, they are named. Granite is not easy to weather and has beautiful color. The appearance color can be maintained for more than a hundred years, due to its high hardness, wear resistance.It is often used as a high-level architectural decoration works, the hall floor and the facade material of building.
Stone Honeycomb Panel
The ultra-thin stone honeycomb composite panels are innovated because of the limited natural stone resources and its application restrict. It is a new type of building materials with a better impact resistance than the ordinary natural stone is with a weight of only 16 kg, is only 1/6 of the weight of its original natural stone slide but the compressive strength is 6 times more than the original stone slices.
Completely overcomed the natural stone’s defects on weight, fragile and other aspects, it provides a more superior performance and wide application field as a new generation building material. Ultra-thin stone honeycomb composite panel is simply bonded with an about 3mm ~ 5mm thick stone sheet and an aluminum honeycomb substrate with a special purpose adhesive. It not only saves the stone material and reduces the weight of finished products, but reflects better in the stone effect. Based on these, there is a large demand from the market.
The advantages of the stone honeycomb panel:
| Item. | Properties | Detailed Description |
| a | Light weight | The marble veneer for the marble composite panel with aluminium plastic panel can be only 3 ~ 5mm thick. Commonly used composite panel with tiles or granite is only with a thickness of about 12mm. It saves much cost at least on the transportation. Accordingly, it is the best choice for the use on the building with a load limit. |
| b | high strength | Marble sandwiched with the tiles, granite, aluminum honeycomb panels and other composite, the bending and fracture resistance, shear strength were significantly improved, which greatly reduce the breaking rate during transportation, installation and use. |
| c | Improved anti-pollution ability | Regular original marble plate will change color or with dirty pollution on the surface if using the cement wet pasting. While for the composite panel, as the dense and hard substrate and the glue film, the above mentioned situation will not happen. |
| d | Easier to control color difference | The marble veneer used on the marble composite panels is three or four times more than the original plate. Therefore, the color and pattern can be 3 or 4 times more the same as the original marble plate. |
| e | Easy installation | Depending on the above characteristics, the efficiency and safety and costs of the installation process are greatly improved. |
| f | Break the restricted area | The original marble plate can be used on the inside and outside wall, ground, windowsill, porch, desktop, etc. But for the ceiling, no decoration company will take risk to use no matter it is marble or granite. The aluminum-plastic backed marble panels or aluminum honeycomb backed marble panel can break through the restricted area of stone honeycomb panel. Because it is very light that the weight of the whole body is only 1/5 to 1/10 of the original plate so that it is capable of being used on the ceiling. |
| g | Sound insulation and moisture-proof | An aluminum honeycomb backed stone panel transcends the properties of the original stone panel on the sound insulation, moisture and heat insulation and cold insulation performance because of the honeycomb structure. |
| h | Energy saving | Further to the above mentioned, Stone aluminum honeycomb panel, after installation in the indoor and outdoor, can greatly reduce the consumption of electricity and heat. |
| i | Cut costs | Due to thin and light stone composite material, it can save costs on transportation and installation. Furthermore, the finished composite stone panel will be more cost-efficient than their original plate. |
Specification
Thickness: 4mm-600mm
Width: 300mm-1200mm.
Length 300mm-2000mm
Max Size: 1500mm*2400mm
Special size can be made as required by the customer.
Application:
External wall decoration;
Interior wall decoration;
Furniture top decoration;
Washroom cubicles;
Bathroom, kitchen interior decoration;
Marine vessels interior decoration;
