Active Member
|
[China]
Address: 22#, Zhangshe Wire Mesh Industrial Park, Anping County, Hebei, China
Contact name:Bai
HESLY HexMesh & Anchor Factory - a brand of Hesly Metal Mesh Group Limited |
|
|
Design
Hexsteel / Hex Mesh is a an unique honeycombed steel designed to provide excellent
retention and reinforcement of thin wall refractories and fully
complements dense hydraulic and chemically bonded refractories in
resisting erosion.
The panels are made of formed steel strips with protruding prongs clamped in such a way to guarantee a high rigidity of the panel also after the rolling.
Hexsteel can be supplied either flat or cut to size and rolled; after rolling, they can easily fit inside vessel walls and provide for a perfect continuity of the refractory lining for Ducts, Furnaces, Reactor Vessels, Cyclones, Flue Gas Lines and other high temperature equipment of virtually any shape or configuration, even with very narrow radii of as small as 15cm.
Application
Process plant which is subject to the passage of erosive gas
streams, especially at high temperature, benefit by cladding with
Hexmetal infilled with erosion resistant refractories. Typical
applications include Cyclones, Flue Gas Lines, Reactor Vessels,
Windboxes, Fan Casings, Burner Quarls: in fact any vessel or
section that is subject to erosion or abrasion
Anchorage Material | Chemical Composition | Typical Service Temperature | ||||||||
AISI | DIN | C% | Si% | Mn% | P% | S% | Cr% | Ni% | others | |
304 | 1.4301 | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.45 | ≤0.30 | 18.0—20.0 | 8.0—10.0 | N | 800℃ |
316 | 1.4401/1.4436 | ≤0.08 | ≤0.75 | ≤2.00 | ≤0.45 | ≤0.30 | 16.0—18.0 | 10.0—14.0 | N:Mo | 800℃ |
321 | 1.4541 | ≤0.08 | ≤0.75 | ≤2.00 | ≤0.45 | ≤0.30 | 17.0—19.0 | 9.0—12.0 | Ti | 800℃ |
310S | 1.4845 | ≤0.08 | ≤1.50 | ≤2.00 | ≤0.45 | ≤0.30 | 24.0—26.0 | 19.0—22.0 | — | 1150℃ |
Inconel 601 | 2.4851 | ≤0.10 | ≤0.50 | ≤1.00 | — | ≤0.15 | 21.0—25.0 | 58.0—63.0 | Al:Cu | 1200℃ |
Inconel 800 | 1.4876 | ≤0.10 | ≤1.00 | ≤1.50 | ≤0.45 | ≤0.15 | 19.0—23.0 | 30.0—35.0 | Al:Ti | 1200℃ |
410S | 1.4001 | ≤0.08 | ≤1.00 | ≤1.00 | ≤0.40 | ≤0.30 | 11.5—13.5 | ≤0.60 | — | 750℃ |
CARBON STEEL | VARIOUS | 550℃ | ||||||||
Material | 0Cr18Ni9, 1Cr18Ni9Ti, SS304, SS316, SS310S, A3, 0Cr13, 1Cr13, etc. |
Gauge | 1.0mm / 1.2mm / 1.5mm / 1.8mm /2.0mm / 2.5mm / 3.0mm |
Depth | 10mm~70mm |
Aperture | 50mm (min 40mm, max 100mm) |
Panel size | 0.96mx1.05m(according to the raw material size) |
Note | Other dimensions & material are also available upon request |
Hexagonal Mesh with bonding holes Hex Mesh with lances
Contact HESLY now for the best supplier:
info@heslymetalmesh.com
