Results forhardness testing equipmentfrom 69842 Products.
|
EN 60598-2-20 clause.20.12.4 Test device suitable for checking security of lampholder contacts Technical parameters: The test device is conform to: EN 60598-2-20 clause.20.12.4 It ...
|
|
|
|
TIA-5050-2018 Volume Control Test System Active Speech Level: The active level of speech or speech-like signals using a speech voltmeter as defined in ITU-T P.56, method B. ...
|
|
|
|
IEC 60601-1-Test Rod According to IEC 60601-1-clause 8.4.2 Diameter: 4.0(-0.05~+0)mm Length: 100(-0~+0.5)mm TESTING AND MEASURING EQUIPMENT/ALLOWED SUBCONTRACTING IEC 60601-1:2005 ...
|
|
|
|
UL Standard for Safety for Electrical Quick-Connect Terminals, UL 310 Ninth Edition 5.2.2 Test tab 5.2.2.1 Test tabs for the insertion-withdrawal test described in Clause 6.4 shall ...
|
|
|
|
IEC 60601-1-Figure 6 Standard test finger IEC61032 Figure 2, Diameter: 12mm Length:80mm Insulated portion: Ø50mm, 20mm wide,100mm long TESTING AND MEASURING EQUIPMENT/ALLOWED ...
|
|
|
|
IEC 60601-1-Figure 6 Unjointed test finger IEC61032 Figure 2, Diameter: 12mm Length:80mm Insulated portion: Ø50mm, 20mm wide,100mm long TESTING AND MEASURING EQUIPMENT/ALLOWED ...
|
|
|
|
IEC 60601-1-figure 7 Test Hook TESTING AND MEASURING EQUIPMENT/ALLOWED SUBCONTRACTING IEC 60601-1:2005 + Am.1:2012 Medical electrical equipment - Part 1: General requirements for ...
|
|
|
|
UL Test Probes UL Test Probe Test Pin Jointed Test Finger Test Fingernail Test Tongue UL standards Articulated Test Probes for electrical safety accessibility test on Protection of ...
|
|
|
|
Reporting Automatic Printer / Report Paper Automatic Stamp And Binding Equipment 1. Product Overview 1.1 Type of equipment This product is based on paper manual seal nail ...
|
|
|
|
Damping shock wave generator SJB61012TG The oscillation wave of the equipment may affect the reliable operation of the equipment and the system. The ringing wave is caused by the ...
|
|
|
|
Ring wave generatorZLB61012T Series The oscillation wave of the equipment may affect the reliable operation of the equipment and the system. The ringing wave is caused by the ...
|
|
|
|
Abrasion Strength Testing Machine Abrasion ResistamceTester Product information The device is used to check abrasion strength of printed circuit boards or the insulating accessible ...
|
|
|
|
Flexible Cable Retaining Force Tester Usage: test the compaction capacity of plug wire and check if the plug wire and electric accessories are firm Meet standard: GB 2099.1-2008 ...
|
|
|
|
GB3048 General Conductor Resistance Test Device Product information: This device is the special appliance used for measuring the conductor resistance. It is applicable not only for ...
|
|
|
|
Twisted Wire Test Apparatus Product Description Standard:IEC60851-5-figure 2 Loads applied to the wire and number of twists
|
|
|
|
Test Device Suitable For Checking Security of Lampholder Contacts Product information: The device is used to check security of lampholder contacts, and conform to the IEC60598-2-20 ...
|
|
|
|
Ipx9k Iec 60529 Ip Stainless Steel Nozzle For Rain Test Chamber , φ24mm Diameter IPX9K-Nozzle according to IEC60529 Figure 7 – Fan jet nozzle dimensions Figure 8 – Fan jet nozzle ...
|
|
|
|
IEC60695-2-10-2021 Glow Wire Tip For Material Testing , Glow Wire Glow-wire material: Nickel/Chromium (>77 %Ni/20 ± 1 %Cr) Diameter: 4,0 mm ± 0,07 mm (before bending) Dimension A: ...
|
|
|
|
Overview Quick Details Place of Origin:Guangdong, China (Mainland) Brand Name:Kingpo Model Number: Kingpo-PAN Power:NO Product Name:Test Vessel Standard:IEC 60335-2-9 IEC60335 -2-6 ...
|
|
|
|
ISO 80369-7 Fig C.3 — Female reference connector for testing female luer lock connector for separation from axial load and resistance to overriding ISO 80369-7 FIGURE C.1 and C.3 ...
|
|
|
You may also be interested in :