Spiral Fire Escape Slide / Shared Type Residential Fire Escape Slide

Spiral Fire Escape Slide / Shared Type Residential Fire Escape Slide
 
Fire Escape Slide Advantages
 
The Fire Escape Slide consists of three layers: outer fire prevention, middle layer insulation, smoke isolation and inner layer guide slip. Each layer had high tensile strength of the pipe, the middle layer position with a special rubber ring, rubber ring with elasticity, make the human body produce certain resistance after buffer, so the rubber makes people slow down speed of about 1.5-4 meters per second to safety down to the ground. The escape chute has four supporting bands, which can prevent the wind from being blown and turned by the wind at the fire scene; it is used to protect the safety of the escaping; it is suggested to escape one person every 3 seconds and escape continuously. The escape chute can be designed according to the height of the building. It is suitable for any place and any building in the height of 60 meters. If it is more than 60 meters, it can be installed at any height. Convenient installation and operation of escape chute. Do not limit the number of users, theelderly and infirm can be used; the external escape slide made of fire retardant materials, fire escape can delay the flames invasion; escape escape can not see the ground scenery, no fear; small area, do not use electric power, operating cylinder and high safety. The escape chute is usually placed in the stainless steel airtight box, which is waterproof, insect proof and pollution resistant. It can be stored for a long time and easy to maintain. Can be equipped in high-rise buildings, fire ladders, fire trainingtowers, oil drilling platform, airport control tower, high-speed rail(EMU), hospitals, schools, office buildings and so on.
 
Fire Escape Slide Main technical parameters 

 
Fire Escape Slide type:
 
escape chute is the door to escape the lives of the victims in the fire. Because opportunities are reserved for people who are prepared. In the event of fire, there is an escape chute, and the people in the building can escape from the scenein the first place. According to the different building or the use of different places, choose different types of suitable escape chute set with the following four kinds. High rise building window escape chute
 
High rise building window Fire Escape Slide
 
Outdoor type: It is usually a stainless steel storage bracket combination box placed in the house near the window. When it is used urgently, first open the stainless steel storage box and lift the slide frame out of the window, then put the escape chute (cloth bag) outlet into the room. The slide frame frame hole relies on the slide down force, and the slide slide to the ground can complete the evacuation of the person.
 
Indoor series type Fire Escape Slide
 
Corridor, platform type escape chute: first make the house corridor and balcony make a 75*75 cm square hole, each floor is fitted with the floor height matching escape chute. When emergency occurs, as long as the operating mechanism is pulled, stored in the stainless steel storage tank in each floor of the escape chute will automatically droop to each lower floor. Evacuate the affected people quickly and safely from dangerous areas.
 
Spiral Fire Escape Slide

1. Indoor, outdoor, common, and mobile devices are available for selection. No space is used to affect the original space.
2. Any floor in any location can be installed within the ccc range.
3. Convenient operation and rapid escape of 22 people per minute, the weight of 35-125Kg old and weak women and children can be used.
4. When using the escape slide, you will not see the scene above the ground without fear.
5. Escape chute, the outer layer is made of flame retardant material forever, and it can delay the invasion of fire tongue when it escapes.
6. The escape chute has high safety and can withstand more than 2000Kg.
7. The outer layer is affixed with luminous precautions and operating instructions, and can be used clearly in the dark.
8. The escape chute is designed according to the principle of physical gravity, and does not need to use electricity to rely on its own gravity.
9. The escape slide adopts vertical type without occupying space, and does not need a wide square.

Shared Fire Escape Slide
 
The construction of a vertical outdoor smoke rush shaped channel from the ground layer to the height of each floor, are connected in series to form a closed fire pipe structure, each floor has a fixed point and an escape pipe entrance box, closed at twenty-four hours on the escape slide, and then put it directly without once there is a fire or emergency evacuation, save time.
 
Mobile Fire Escape Slide
 
For fire ladders, fire ladders to rescue when the height of the fire scene to be specified, if the escape slide is too long, is to save staff will be unable to find export.
Escape slide is too short, rescue staff will die. To solve this problem, we have produced a splicing escape chute, which consists of 3 meters,2 meters and 1 meters length slipway.