1000BASE-BX BiDi 1.25G SFP 1550nm-TX/1490nm-RX SMF 120km Transceiver Module LC DOM

Cisco Compatible BiDi SFP 1.25G 1550nm-TX/1490nm-RX 120km SMF DOM Simplex LC Transceiver Module 1000BASE-BX

Description

The GIGAOPTO's GTS-B5412-C0DC SFP BIDI transceiver is a small form factor pluggable module for Gigabit Ethernet 1000BASE-BX and Fiber Channel single fiber applications by using 1490nm/1550nm transmitter and 1550nm/1490nm receiver. The SFP transceiver provides up to 120km transmission distance of 1000Base-BX throughput over single-mode fiber (SMF). Its electrical interface is MSA compliant 20-pin edge type connector and the optical interface is Simplex LC connector.

The transmitter section uses a class 1 laser compliant according to International Safety Standard IEC 60825. The receiver section uses an integrated B type/A type detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC.

This transceiver is fully compliant with SFP Multi-Source Agreement (MSA), IEEE 802.3 1000BASE-BX120 and SERDES

standard.

Specification

Notice: When the long reach transceiver is used in short distance transmission, please matched with appropriate attenuator

according to the table.

Features

• Support 1.25Gbps data links
• A type: 1490nm FP transmitter / 1550nm receiver

B type: 1550nm transmitter / 1490nm receiver

• Up to 120km with 9/125 µm SMF
• BIDI LC/UPC type pluggable optical interface
• Low power dissipation
• Mental enclosure, for lower EMI
• Support Digital Diagnostic Monitor interface
• Single +3.3V power supply
• Hot-pluggable
• Class 1 FDA and IEC60825-1 Laser Safety compliant
• Operating temperature range:

Commercial: 0°C~70°C (32 to 158°F)

Industrial: -40°C~85°C (-40 to 185°F)

• RoHS6 Compliant
• Compliant with INF-8074i, SFF-8472
• Compliant with IEEE 802.3z

Application

• 1.25Gbps Optical systems
• Gigabit Ethernet
• 1.063Gbps Fiber Channel
• Other Optical Links

Compatibility

All Gigaopto transceivers are standards-based and MSA (Multi-Source Agreement) compliant, and rigorously tested and coded in our own facilities to ensure the highest level of performance. We conduct 100% application testing under end-use conditions.
For this (1000BASE-BX BiDi SFP TX1550nm/RX1490nm 120km), please refer to the P/N correspondence table. For more product compatibility, please feel free to send us a message.

Ordering Information