Active Member
|
[China]
Address: district,#Huanzhendong Rd,Shunjiang ,Beijiao,Shunde,Foshan,Guangdong,China zipcode:528308
Contact name:Helen zhong
V-Hold Woodworking Machinery Co., Ltd. |
|
|
Aggravated Type , High precision Four Side Moulder VH-M823L for American classical door and frame
1. The prominent feature of M823L moulder is there is two left vertical cutter shafts and two vertical right
cutter shafts on both side. As normal 23 series four side moulder, M823L has working width range 25-230
mm and working thickness range 8-160 mm.
|
2. M823L moulder has more functions compared to the others with stronger process capability. According
to the different products’ needs, the eight cutter shafts can be flexibly utilized. And fine finishing of the
products can respectively be done with two cutter shafts on each side. Not only the end products have high
degree of finish, but also reducing tool wear and enhancing service life of equipment;
|
3. Application: this machine with two vertical cutter shafts on
both sides can finish machining wood products which both side require a large amount of cutting in
single process. Applicable for wooden ware such as large European and American-style windows and doors, large
picture frames. |
| Model | VH-M823E | |
| Specification | Working width | 25-230 |
| Working thickness | 8-160 | |
| Working table length | 1970 | |
| Feeding speed | 6-36 | |
| Main spindle diameter (mm) | Φ 40 | |
| Main spindle revolution (r/min) | 6500 | |
| Air pressure (Mpa) | 0.6 | |
| Motor power (KW) | 1st Lower Shaft | 7.5kw/10HP |
| 1st Right vertical spindle | 7.5kw/10HP | |
| 1st Left vertical spindle | 7.5kw/10HP | |
| 2st Right vertical spindle | 7.5kw/10HP | |
| 2st Left vertical spindle | 7.5kw/10HP | |
| 1st Upper Shaft | 11kw/15HP | |
| 2nd Upper Shaft | 7.5kw/10HP | |
| 2nd Lower Shaft | 7.5kw/10HP | |
| Feeding beam lifting | 1.1kw/1.5HP | |
| Feeding motor | 7.5kw/10HP | |
| Total power | 72.1kw/98HP | |
| Cutter diameter | 1st Lower Shaft | Φ 125 |
| 1st Right Vertical spindle | Φ 125-Φ 180 | |
| 1st Left vertical spindle | Φ 125-Φ 180 | |
| 2nd Right Vertical spindle | Φ 125-Φ 180 | |
| 2nd Left vertical spindle | Φ 125-Φ 180 | |
| 1st Upper Shaft | Φ 125-Φ 180 | |
| 2nd Upper Shaft | Φ 125-Φ 180 | |
| 2nd Lower Shaft | Φ 125-Φ 200 | |
| Remark | Feeding wheel diameter (mm) | Φ140 |
| Dust outlet diameter (mm) | Φ140 |
Standardization of the production process
Advanced science and technology and high precision equipment guarantee the production quality to be reliable , V-hold insist of "technology improvement quality guarantee" in principle in their high speed improvement, using the distillate of excellent technology all over the world ,absorb the good quality fron every technology area .V-hold put in large funds of machining machines ,import advanced equipment from Japan and German, group a top class production line in Chia mainland.The productivity and technology are raising up everyday and round into the best woodworking machinery group with normalize and high technology in China
