V-Hold Woodworking Machinery Co., Ltd. |
|
Heavy Duty Four Side Moulder VH-M523 with Five spindle for solid wood door frame
Heavier Type Four Side Moulder with 230mm working width
Four Side Moulder VH-M523
Professional solution for processing Hard wood strip, floor, doors and large cutting capacity strips. There are some example below. |
Solid wood door frame sample | Solid wood floor sample | Kitchen cabinet door frame sample |
Feature
1. Body structure of the machine is made of casting Iron, it has better wear resistance and
shock absorption. This provides a good basis for the smooth operation of the cutter
shaft and feeding system; |
2. This Machine have Inverter feeding , feeding speed can up to 36 m/min; |
3. Each spindle have its own Motor , which can guarantee the power for cutting; |
4. All shaft adjustment are carried out in front of the machine for convenience; |
5. Electroplating with chrome improves durability of the worktable surface; |
6. The under drive roller improves feeding performance; |
7. Adopting electric component from well-known brand with steady quality; |
8. Sealed safety enclosure avoid splashing of wood chips and insulate the noises, it is good
for the safe protection; |
9. Short material auxiliary device is equipped for advancing the smooth feeding of short
piece availably; |
10. Optionally Choice: Slotted plane for special need of the customers, restructuring
to high speed moulder with speed up to 60m/min. |
Model | VH-M523 | |
Specification | Working width | 25-230 |
Working thickness | 8-160 | |
Working table length | 1970 | |
Feeding speed | 6-36 | |
Main spindle diameter (mm) | Φ 40 | |
Main spindle revolution (r/min) | 6500 | |
Air pressure (Mpa) | 0.6 | |
Motor power (KW) | 1st Lower Shaft | 7.5kw/10HP |
Right vertical spindle | 7.5kw/10HP | |
Left vertical spindle | 7.5kw/10HP | |
1st Upper Shaft | 11kw/15HP | |
2nd Lower Shaft | 7.5kw/10HP | |
Feeding beam lifting | 0.55kw/0.75HP | |
Feeding motor | 5.5kw/7.5HP | |
Total power | 47.05kw/63.93HP | |
Cutter diameter | 1st Lower Shaft | Φ 125 |
Right Vertical spindle | Φ 125-Φ 180 | |
Left vertical spindle | Φ 125-Φ 180 | |
1st Upper Shaft | Φ 125-Φ 180 | |
2nd Lower Shaft | Φ 125-Φ 200 | |
Remark | Feeding wheel diameter (mm) | Φ140 |
Dust outlet diameter (mm) | Φ140 |
In the early 90s V-HOLD single side moulder was moulder was developed successflly,its sales
network has spread nationwide
1996V-HOLD wood working machinery manufacture Co, Ltd was been established. The forst 4-
side Moulder of V-HOLD was produced in the same year.