Active Member
|
[China]
Address: 2# Jinlong Rd. Baolong Industrial Zone, Longgang Dist. Shenzhen China 518000
Contact name:Tarik Lu
Forsentek Co., Limited |
|
|
Triaxial Load Cell 50kN 100kN 200kN Multi-Axis Sensor 11.2klbf 22.5klbf 45klbf
3-Axis Force Sensor F3K is made of alloy steel based on strain gauge technology intended for 3-axis force measurement in Fx/Fy/Fz at the same time,each axis is able to measure force in both tension and compression direction.Low profile multi-component force transducer F3K offers 50kN / 100kN / 200kN three measuring ranges to choose from.You may find 3-axis sensor is interchangeable with interface 3A300 series 3-axis load cell. Typical applications for triaxial force sensor F3K are for example force exertion control in robotics, automotive crash testing, industrial test benches, grinding force control, actuator operating force measurement and so on.
Dimensions
Specifications
| Rated Capacity | 50kN / 11.2klb / 5ton 100kN / 22.5klb / 10ton 200kN / 45klb / 20ton |
| Sensitivity | 1.0mV/V |
| Excitation | 3-15V |
| Zero balance | ±0.05mV/V |
| Non-linearity | ±0.3% R.O. |
| Hysteresis | ±0.3% R.O. |
| Non-repeatability | ±0.1% R.O. |
| Creep(5min) | ±0.05% R.O. |
| Safe overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Compensated temperature | 0...+40oC |
| Operating temperature | -10...+60oC |
| Temperature shift on zero | ±0.03% R.O./oC |
| Temperature shift on span | ±0.02% R.O./oC |
| Input resistance | 700±100 ohms |
| Output resistance | 700±100 ohms |
| Insulation resistance | >2000M ohms |
| Ingress protection | IP65 |
| Material of element | Alloy steel |
| Cable | Ø6*3000mm 12-pin shielded |
| Wiring code | 4-wire connection for each axis |
Multi Axis Force Sensor 50kN 100kN 200kN 3-Axis Load Cell 11.2klbf
22.5klbf 45klbf
Click here to download datasheet
