Active Member
|
[China]
Address: 2# Jinlong Rd. Baolong Industrial Zone, Longgang Dist. Shenzhen China 518000
Contact name:Tarik Lu
Forsentek Co., Limited |
|
|
Smallest force transducer 2lb 5 lb 10lb 20lb 50 lb tension
compression sensor
Smallest tension compression force sensor FSSQ offers a compact design for a variety of applications.
the S Beam Load Cell series provides accuracy, compact design
features, and five capacity ranges 10N / 20N / 50N / 100N / 200N to
choose from.The jr s-beam load cell FSSQ utilizes metal foil strain
gauge technology to deliver 2.0mV/V output with maximum 0.2%
non-linearity,the compact design enables the FSSQ to be easily
embedded into machinery or test equipment – ideal for packaging
machinery, assembly machinery or end-of-line test equipment.The
micro force sensor features M2 threaded holes on two sides for the
mounting of attachments or implements for both tension and
compression force measurement in applications with limited space.A
force sensor is a transducer that converts force acting on it into
electronic signal which is proportional to the applied force.The
acting force causes deformation of the measuring element,the bonded
strain gage deforms accordingly which will cause the resistance
change of the wheatstone bridge,under constant power supply,the
output signal between Sig+ and Sig- will change proportionally,thus
the force can be measured by measuring the output signal from the
load cell.Tension and compression force transducer FSSQ is designed
to measure force in both tension and compression direction,outputs
millivolt signal ranging -20~20mV, and signal amplification may be
required for most applications, a load cell signal conditioner can
be used to get -5~5V, 0-10V or 4-20mA signal which is proportional
to applied force.The amplified output is can be easily processed by
PLCs and data acquisition software.The force can be displayed
through force indicator,force meter FPT is integrated with high
accuracy/low noise 24 bit Sigma-Delta ADC,sampling speed up to
960Hz makes it suitable for both static and dynamic measurement;FPT
also supports Modbus RTU protocol with RS485 or RS232 communication
port,amplified signal 0-5V,0-10V,0-20mV or 4-20mA is also
achievable from FPT.
Dimensions
| Ordering code | Measurement Range | Force direction |
| FSSQ-10N | 0-10N / 0-1kgf | Tension/Compression |
| FSSQ-20N | 0-20N / 0-2kgf | |
| FSSQ--50N | 0-50N / 0-5kgf | |
| FSSQ-100N | 0-100N / 0-10kgf | |
| FSSQ-200N | 0-200N / 0-20kgf |
| Capacity | 10N / 1kg / 2.2 lbf 20N / 2kg / 4.4 lbf 50N / 5kg / 11 lb 100N / 10kg / 22 lbf 200N / 20kg / 45 lbf |
| Rated output | 2.0mV/V |
| Excitation | 3-12V |
| Zero balance | ±0.1mV/V |
| Nonlinearity | ±0.2% R.O. |
| Hysteresis | ±0.2% R.O. |
| Nonrepeatability | ±0.1% R.O. |
| Creep(5min) | ±0.1% R.O. |
| Safe overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.03% R.O./oC |
| Temperature shift span | ±0.02% R.O./oC |
| Input resistance | 380±30 ohms |
| Output resistance | 352±3 ohms |
| Insulation resistance | >2000M ohms |
| Ingress protection | IP62 |
| Material of element | Stainless steel |
| Cable | Ø2*3000mm 4-core shielded |
| Wiring code | Compression@ Green--Signal+ White--Signal- |
Smallest s-beam force transducer 10N 20N 50N 100N 200N tension compression sensor
