Active Member
|
[China]
Address: 2# Jinlong Rd. Baolong Industrial Zone, Longgang Dist. Shenzhen China 518000
Contact name:Tarik Lu
Forsentek Co., Limited |
|
|
Small tension compression load cell 500N 200N 100N 50N miniature force transducer
Miniature tension/compression load cell force sensor FLN is made of stainless steel based on strain gauge technology with mV/V output,in-line load cell offers 50N / 100N / 200N / 500N / 1000N / 2000N / 3000N / 5000N eight measuring ranges to choose from. M8/M4 threaded rods located on both end can be used to install attachments,such as eye bolt,bolt adapter,etc.,to fit requirement of different applications.Compact size makes in-line load cell FLN applicable for tension compression force measurement applications where mounting space is limited.
Dimensions(Unit in "mm")
| Ordering code | Measurement Range | Force direction |
| FLN-5kg | 0-50N / 0-5kgf | Tension/compression |
| FLN-10kg | 0-100N / 0-10kgf | |
| FLN-20kg | 0-200N / 0-20kgf | |
| FLN-50kg | 0-500N / 0-50kgf | |
| FLN-100kg | 0-1kN / 0-100kgf | |
| FLN-200kg | 0-2kN / 0-200kgf | |
| FLN-300kg | 0-3kN / 0-300kgf | |
| FLN-500kg | 0-5kN / 0-500kgf |
Specifications
| Capacity | 50N / 100N / 200N / 500N / 1kN / 2kN / 3kN / 5KN 5kg / 10kg / 20kg / 50kg / 100kg / 200kg / 300kg / 500kg 10lb / 20lb / 45lb / 110lb / 220lbs / 450lbf / 660lb / 1.1klb |
| Rated output | 1.0mV/V |
| Excitation | 3-10 V |
| Zero balance | ±0.1mV/V |
| Nonlinearity | ±1% R.O. |
| Hysteresis | ±1% R.O. |
| Nonrepeatability | ±0.5% R.O. |
| Creep(3min) | ±0.3% R.O. |
| Safe overload | 120% F.S. |
| Ultimate overload | 150% F.S. |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.05% R.O./oC |
| Temperature shift span | ±0.05% R.O./oC |
| Input resistance | 1000±100 ohms |
| Output resistance | 1000±100 ohms |
| Insulation resistance | >5000M ohms |
| Ingress protection | IP66 |
| Material of element | Stainless steel |
| Cable | Ø2*3000mm 4-core shielded |
| Wiring code | Red--Excitation+ Black--Excitation- |
Small tension compression load cell 500N 200N 100N 50N miniature
force transducer
Instruction of load cell output:
Load cell output: = (Power supply * Rated output) * Load / Capacity
Rated output of Miniature Traction Compression Force Sensor FLN is
around 1.0mV/V.
Power supply of Miniature Push Pull Load Cell FLN is normally
within 3-12V.
Load / Capacity is within 0-1.
So the output range of Miniature Inline Load Cell FLN is normally
within -12mV...+12mV for tension/compression force measurement.
Example: Miniature Push Pull Load Cell FLN-50kg with 1.0mV/V
sensitivity powered by 5V DC,the output range is -5mV...+5mV.
A signal conditioner can be used with the load cell to deliver -5~5V, 0-10V or 4-20mA output.
Example: Miniature Tension Compression Sensor FLN-100kg working with -10-10V amplifier, the Force-Voltage relationship will be 0-100kg compression load VS 0-10V output, 0-100kg tension load VS 0-(-10V) output, which is linear regardless of the error, 1V output corresponds to 10kg compression load, -2V output corresponds to 20kg tension load, and so on.
