Results forfluid loss control additivefrom 2190 Products.
|
|
... polymerized by heat resistance and salt tolerance allyl monomers. It provides better rheology regulation and fluid loss control. 1, The product has some advantages as follows: ...
|
|
|
|
...G302 Fluid Loss Control Additive for Oil Well Cement Product Description G302 can control fluid loss though forming tight polymer film and enhancing viscosity of water phase. Characteristics G302 consists of ...
|
|
|
|
|
...fluid loss control additive Cationic polyacrylamide Product introduction Cationic polyacrylamideis a water-soluble synthetic polymer, which has the properties offlocculation, .....
|
|
|
|
|
..., no fluorescence, non poisonous and easily degrading, it is the new type environmental protective mud additive. Features Of Polyol Drilling Fluid Additive Applicable in a wide
|
|
|
|
|
...Fluid loss control additives Oil Drilling CMC powder and granular ( CAS No. 9004-32-4 ) 1. Quick Detail : a. Appearance: floccule, powder ...
|
|
|
|
..., and is made by grafting copolymerization and sulfonation. The main function is to reduce filtration loss, but it can also reduce viscosity at the same time. It is heat-resistant because...
China (mainland)
|
|
|
|
... viscosity drilling fluids additives PAC LV is ultra low viscosity polyanionic cellulose and low molecular weight, low viscosity type polymer designed specifically for use in solids-laden, water-based drilling fluids, ...
|
|
|
|
|
...Filtration Control Additive Chemical Multifunctional Fluid Loss Additive CG610S-D SUMMARY 1. Very effective fluid loss additive with high purity and low dosage. 2. Provide Fluid ...
china
|
|
|
|
|
...% KCl solution after hot roll Viscosity (600rpm, 77, mPa.s) 31-35 9-12 28-31 4-8 API fluid loss (ml) ＜10 ＜15 ＜12 ＜30
China
|
|
|
|
|
..., composed of ST-ZJ102A and apt ST-ZJ102B, have more excellent performance,such as little fluid loss, zero vertical free water and no retardation effect, quickly developed early ...
|
|
|
|
... Moisture: 10% (maximum) Purity: 95% (minimum) pH (1% solution): 6.5 to 8.0 Apparent viscosity: 40cps (maximum) API filtrated loss: 16mL (maximum) Packing: 25kg kraft bag, palletized and shrink wrapped 20ft FCL: 18 to ...
|
|
|
|
Name industrial CMC Classification Chemical Auxiliary Agent Other Names:CMC-Carboxyl Methyl Cellulose Sodium Appearance:White and flowingfine powder purity :90%(as per your request) PH VALUE: 6.0-8.0 D.S :Above 0.9 ...
china
|
|
|
|
|
... Type SUMMARY 1. Fluid loss additives are added to reduce uncontrolled water loss from the slurry into the porous formation. 2. Controls fluid loss in low, normal and high ...
|
|
|
|
..., expansion and dispersion of shale and cuttings, mud making, and keep bore hole steady. Perfect fluid loss control, good resistance ability to anti saturated calcium and salt. Can
|
|
|
|
... is applicable of wide temperature range and it's resistant to high temperature. Specifications of the FLUID-LOSS CONTROL AGENTS (FLCA)
|
|
|
|
...Fluid Loss Control (Salt Water) MID-C302 is a synthetic polymer used to control filtrate loss in all cement conditions. This additive is primarily a fluid-loss control additive which can be used in cement slurries ...
|
|
|
|
|
...Home > Products > Oil Well Cementing Additives Cementing HTHP Fluid Loss Control KOL FIL 30 CEM Property:KOL FIL 30 CEM can control fluid loss though forming tight polymer film ...
China
|
|
|
|
|
... cement fluid loss. The fluid loss control water loss with a good ability to interface in the formation of a compact filtration of non-penetration of polymer film, the film has ...
China
|
|
|
|
|
...Anti-salt and Anti-temperature water-loss control additive LY-1 for drilling fluid Products ID: 5003 Production: Applied material: Application area: Enter email to free download ...
China
|
|
|
|
Name industrial CMC Classification Chemical Auxiliary Agent Other Names:CMC-Carboxyl Methyl Cellulose Sodium Appearance:White and flowingfine powder purity :90%(as per your request) PH VALUE: 6.0-8.0 D.S :Above 0.9 ...
|
|
|
You may also be interested in :
