3, Functional description of each part:
1. Traction Department:
1. The traction roller is driven by a 7.5KW servo motor.
2. Waste edge recycling device:
Use a fan to blow out the waste and waste materials, and the
customer will equip a mesh box for collection.
III. Winding mechanism: (finished product unloading is completed
mechanically)
1. The cut material is independently wound using both upper and
lower axes, and the slitting knife uses a circular knife for
slitting (8 pairs)
2. The upper and lower winding shafts each have one 7.5KW servo
motor with pneumatic expansion shaft. The winding tension is
automatically controlled by Siemens PLC based on the current coil
diameter, ensuring that the finished material is neat when multiple
slits are cut. All coil end faces are flat, and the flatness of the
disc surface is freely selected by the pneumatic pressure roller
and the self weight pressure roller for cutting. The tightness of
the inner and outer layers of the finished coil is controllable,
which is a spiral winding method. As the winding diameter continues
to increase, the PLC automatically controls the speed of the
winding servo motor to decrease.
5. Discharge device
Adopting a shaftless hydraulic automatic feeding structure
(1) One pair of discharge chassis
(2) 1 set of analog correction motor
(3) Guide rail 35 model 8 pieces
(4) One pair of high-quality steel is used for the 40 thick
memorial archway
(5) 1 pair of lifting swing arms
(6) Cylinder 4 pairs
(7) 1 pair of non axis top cones
(8) Air brake 1 pair
Electrical equipment adopts
Chint Group is used for low-voltage electrical appliances, Snyder
is used for button switches, Siemens is used for PLC, and the
operating system of the whole machine is controlled
4, Machine Part Location