Ruian Haijing Machinery Co., Ltd. |
Verified Suppliers
|
HJ-D1100- III three servo fully automatic tension slitting machine
1, Parameter indicators:
1. Material type: PET, BOPP, BOF, PE, OPP and other rolled
materials;
2. Material thickness: 0.012-0.5mm (film); 30-450g (paper)
3. Maximum diameter of raw materials: 1400mm
4. Raw material tube core: 3 "paper tube
5. Maximum width of raw materials: 1100mm
6. Roll surface width: 1150mm
7. Cutting width: 10-1100mm
8. Reeling tube core: 3 "paper tube;
9. Maximum diameter of winding: 600mm
10. Total deviation correction stroke: 150mm
11. Maximum speed: 300 meters/minute
12. Cutting speed: 10-300 meters/minute
13. Total power supply: 12.5KW
14. Total weight: approximately 4200KG
15. External dimensions: 3200 long, 2600 wide, and 1500mm high
Part Name | Specification and model | quantity | brand |
45 # steel frame | Wall panel net thickness 40mm | 1 pair | |
3-inch inflatable shaft | 2 pieces | ||
Main traction rod | φ 120 * 1150mm | 1 piece | |
Main traction rubber roller polyurethane | φ 120 * 1150mm | 1 piece | |
Hard alumina guide roller | Φ 75 * 1150mm | 13 pieces | |
Winding servo | 3.7KW | 2 sets | Beauty Department |
Traction servo | 3.7KW | 1 set | Beauty Department |
Magnetic powder brake is used for unwinding | 20KG | 1 unit | |
Waste blowing edge fan | 1.1KW | 1 unit | Wuxi |
bearing | 1 batch | HRB | |
Pneumatic components | 1 batch | ||
drvie | 3.7KW | 3 units | Shenzhen Hongyuan |
Ultrasonic correction of deviation | 1 set | Bats | |
Master PLC programmable controller | CPU224XP | 1 piece | Siemens |
7-inch true color touch screen | TPC1061Ti | 1 piece | Beijing Kunlun Tongshi |
proximity switch | 1 piece | Japan OMRON | |
Low Voltage Apparatus | 1 batch | schneider | |
switch power supply | S100-24 | 1 piece | mean well |
3, Functional description of each part:
1. Unwinding Department:
1. The unwinding adopts a shaftless pneumatic feeding rack, which
is convenient for single person operation. Adopting a special
inflatable shaft form, it does not damage the inner wall of the
tube core.
2. There are three modes for freely switching the unwinding
tension: pressure sensor closed-loop automatic constant tension
control mode, pressure sensor free open-loop automatic constant
tension control mode, and manual tension.
3. The unwinding diameter is automatically detected by the
proximity switch at the unwinding transmission shaft, without the
need to input material thickness. The residual unwinding diameter
can be set to automatically slow down and stop, making it
convenient for the next coil to be received.
4. Equipped with a mechanism for manually adjusting the release and
tightening edges, with an adjustment range of ± 10mm.
5. The automatic deviation correction system automatically corrects
the edge of the film or paper.
II. Traction Department:
1. The traction roller is driven by a 3.7KW servo motor.
III. Waste edge recycling device:
Use a fan to blow out the waste and waste materials, and the
customer will equip a mesh box for collection.
4. Winding mechanism: (The left or right end discharge of finished
products is determined by the customer when ordering)
1. Use both upper and lower axes to independently roll the cut
material.
2. The upper and lower winding shafts each have one 3.7KW servo
motor to drive the pneumatic slip shaft. The winding tension is
controlled by two Japanese SMC electric control proportional
valves, and the PLC automatically controls the tension based on the
current coil diameter, so that there is no material thickness
factor when multiple slits are cut. All coil end faces are flat,
and the flatness of the disc surface is freely selected by the
pneumatic pressure roller and the self weight pressure roller. The
tightness of the inner and outer layers of the finished coil is
controllable, which is a spiral winding method. As the winding
diameter continues to increase, the PLC automatically controls the
speed of the winding servo motor to decrease.
6. The slitting knife adopts a round knife for slitting (6 pairs),
with an optional air knife (320 yuan per piece)
The touch screen adopts Beijing Kunlun Tongshi 7-inch
Main electrical appliances; 3 Hongyuan drives, Siemens PLC from
Germany
Shaftless discharge rack; Hydraulic automatic feeding rack, 1
hydraulic station, 4 oil cylinders, 8 guide rails, 1 pair of air
brakes, 1 pair of top cones, 3 aluminum rods, and 1 set of bat
correction
Quotation
(1) The sales price of HJ-D1100 is 136600 yuan, and the above
prices include tax and shipping costs
(2) Payment method; After signing the contract, a down payment of
30% will be made, and 60% will be paid before shipment. After
debugging and acceptance, the remaining 10% will be paid
(3) Delivery time; About 35 days, the specific delivery time is
confirmed by signing the contract.
(4) Warranty period; 1 year.
Company name: Haijing Machinery
Person in charge: Manager Wu
Phone number: 13819753629,18627295765