Active Member
|
[China]
Address: C-floor 4, R&D HUB 3 No. 18, Changwu Middle Road, Wujin District, Changzhou City, 213161, Jiangsu, China
Contact name:Tina Huang
JIANGSU ESTY BUILDING MATERIALS CO.,LTD |
|
|
Static electricity swoon everywhere in our daily life,there might
be super high static electricity voltage around us or surrounded
the body,thousands of volts or even ten thousands of volts.35,000
volts of static electricity generates when walking pass the
chemical fiber carpet,about 7000 volts when reading plastic
manuals,which might bot be felt by people,however it's fatal
hazards to some sensitive equipments.Static electricity hazards may
cause very serious consequences and losses.It could inadvertently
shoot expensive devices,resulting in billions of dollars losses in
electronics industry annually……
Nowadays people increasingly
realize the importance and necessity of ESD protection,while the
anti-static PVC floor system is the top priority of electrostatic
protection.Perfet anti-static PVC floor system could prevent static
electricity from generation,release static electricity into the
earth to prevent accumulation of dust.
Anti-static PVC floor has been
widely applied to e-shop,clean rooms,communication rooms and other
precision instruments and rooms for equipment operation.
| Technical Data | Test Method | Test Results | |
| 1 | Size | EN426 | 600 x 600mm, 900 x 900mm |
| 2 | Thickness | EN426 | 2.0mm, 3.0mm |
| 3 | Weight | EN430 | 3.8kg / 5.7kg |
| 4 |
Electric Properties | DIN51953 ASTM F-150 OR NFPA99 | Antistatic Tile: 10^6~10^9 ohm |
| 5 | Conductive Tile: 10^4~10^6 ohm | ||
| 6 | Decay Time | SJ/T10694-2006(±1000V±100V≤2s) | <0.3S |
| 7 | Charge Voltage | SJ/T10694-2006(ⅠVⅠ<100V) | 70V |
| 8 | Fire Resistance | DIN4102 | B1 |
| 9 | Combustion Properties | SJ/T11236-2001(<10S,reach FV-0) | 0.35IFV-0 |
| 10 | Amount of Anti Wear | SJ/T11236-2001(≤0.020g/cm 21000r) | <0.014 |
| 11 | Anti Wear Properties | EN660pt2 | ITEN-T<2.0mm3 |
| 12 | Wheel Pressure | EN425 | No influence |
| 13 | Residual Conavity | EN433/DIN51955 | 0.03mm |
| 14 | Dimension Stability | ≤0.10% | |
| 15 | Color Fastness | ISO105BO2 | >6 |
Brief Introduction of Installation
(1)the requirements of foundation
1.The ground should be waterstone ground, ceramic tile ground,
wooden ground or cement ground.
2.The ground should be smooth and level. Its unflatness should be
less than 0.2%.
3.The ground should have enough strength and no the phenomenon of
sand coming out and separation.
4.The ground should be dry. It is necessary for a new ground to dry
about 30days
(2)Procedure of construction
Clean the ground - spread the earthing conductive net-lead out the
earthing line-coat strong adhesive-coat conductive adhesive-lay
floor-welding floor-cleaning-inspect properties
(3)Maintenance of floor
1.It is not permitted that sharp and rough heavy matters scribe and
drag on the surface of floor and that personnel who wear shoes with
nails walk on the floor. The floor should be kept cleaning.
2.It is not permitted that the chairs which have black rubber
cushion put on the floor in order to avoid black sulfide polluting
its surface.
3.If there are oil or dirty on its surface, it may be cleaned with
detergent. If there is scribed sign, if can be recovered through
fine abrasive paper.
4.If there are heavy oil and dirty caused by install equipments.
Our factory has special washer to clean them.
5.Our factory also has anti-static wax that can be used to maintain
the floor. In general, it should be coated one time every six
months. If the personnel walking on the floor are busy, it should
it should be coated every three months.
| thickness | packing details |
| 2mm | 28pcs/box ,32-36box/pallets,13pallests/20GP,4500sqm/20GP |
| 3mm | 28pcs/box ,30-32box/pallets,13pallests/20GP,3200sqm/20GP |
