Home Companies JIANGSU ESTY BUILDING MATERIALS CO.,LTD

Static Control Pvc Vinyl Flooring For Electronic Factory , Long Life Use Time

Active Member

Contact Us

[China]

Address: C-floor 4, R&D HUB 3 No. 18, Changwu Middle Road, Wujin District, Changzhou City, 213161, Jiangsu, China

Contact name:Tina Huang

JIANGSU ESTY BUILDING MATERIALS CO.,LTD

Static Control Pvc Vinyl Flooring For Electronic Factory , Long Life Use Time

Country/Region	china
City & Province	changzhou jiangsu

Product Details

Anti Static PVC Flooring For Electronic Factory Thickness 2mm

Product Description
Static electricity swoon everywhere in our daily life,there might be super high static electricity voltage around us or surrounded the body,thousands of volts or even ten thousands of volts.35,000 volts of static electricity generates when walking pass the chemical fiber carpet,about 7000 volts when reading plastic manuals,which might bot be felt by people,however it's fatal hazards to some sensitive equipments.Static electricity hazards may cause very serious consequences and losses.

Nowadays people increasingly realize the importance and necessity of ESD protection,while the anti-static PVC floor system is the top priority of electrostatic protection.Perfet anti-static PVC floor system could prevent static electricity from generation,release static electricity into the earth to prevent accumulation of dust.
Anti-static PVC floor has been widely applied to e-shop,clean rooms,communication rooms and other precision instruments and rooms for equipment operation.

Installation
Conductive tile and Static-Dissipative tile should be installed on sub floors that are leveled, smooth and free of cracks. Residual humidity should be under 2.5% tested with the CM Dumb test. Tiles, adhesive, and installation site should reach a temperature of at least 18℃ at least 24 hours before installation, and paste the tiles with qualified conductive glue below 10^5Ohm.
For further details on installation methods, pls contact with us.

Product Specification

	Technical Data	Test Method	Test Results
1	Size	EN426	600 x 600mm, 900 x 900mm
2	Thickness	EN426	2.0mm, 3.0mm
3	Weight	EN430	3.8kg / 5.7kg
4	Electric Properties	DIN51953 ASTM F-150 OR NFPA99	Antistatic Tile: 10^6~10^9 ohm
5	Electric Properties	DIN51953 ASTM F-150 OR NFPA99	Conductive Tile: 10^4~10^6 ohm
6	Decay Time	SJ/T10694-2006(±1000V±100V≤2s)	<0.3S
7	Charge Voltage	SJ/T10694-2006(ⅠVⅠ<100V)	70V
8	Fire Resistance	DIN4102	B1
9	Combustion Properties	SJ/T11236-2001(<10S,reach FV-0)	0.35IFV-0
10	Amount of Anti Wear	SJ/T11236-2001(≤0.020g/cm 21000r)	<0.014
11	Anti Wear Properties	EN660pt2	ITEN-T<2.0mm3
12	Wheel Pressure	EN425	No influence
13	Residual Conavity	EN433/DIN51955	0.03mm
14	Dimension Stability		≤0.10%
15	Color Fastness	ISO105BO2	>6