|
[China]
Trade Verify
Address: B1505, FORTUNE PLAZA, No.1, Yuanmei Road, Nancheng District, Dongguan City, Guangdong Province, China
Contact name:Seline Yu
DONGGUAN YUYANG INSTRUMENT CO., LTD |
|
Verified Suppliers
|
|
|
IP5X IP6X Professional Environment Sand Dust Test Chamber
IP5X IP6X Professional Environment Sand Dust Test Chamber +15～+40℃ 2 -4 Kg/m3
Application:
Professional Environment Sand Dust Test Chamber is designed
according to GB4706, GB2423, GB7000.1, IEC60529,ect standards and
meet the IPX5 and IPX6 dust test requirements. it use artificial
dust environmental to test the dust-proof ability of sample tested
in the situation of storage,transportation and performance.
Parameter:
| Temperature range: | +15～+40℃( dust dehumidification) |
| Humidity range: | relative humidity |
| Dust concentration in box/pipe: | 2Kg/㎡ |
| Dosage talc: | 2kg/ ㎡, can be recycled |
| Dust requirements: | dust used should contain 1Kg of dry quartz sand |
| Particle distribution: | A) Through 150 μm aperture, 104 μm diameter: 99%~100% B) Through 105 μm aperture, 64 μm diameter: 76%~86% C) Through 75 μm aperture, 52 μm diameter: 60%~70% |
| Nominal wire diameter: | 50um |
| Nominal spacing between lines: | 75um |
| Airflow velocity: | ＜ 2m/s |
| Wind path parts: | centrifugal fan |
| Chamber bearing: | product under test in the dust test box shall ＜ 40kg |
| Dust concentration: | 2 -4 Kg/m3 |
| Test chamber dimension: | 600×600×600mm (L*W*H) |
| Outer dimension: | 1150*1200*1750MM |
Characteristics:
1. The inner shell and outer shell of the test box are made of 304
stainless steel
2. Dust-blowing motor for the characteristics of stainless steel
housing, sealing, low noise, high wind
speed
3. The inner shell of the box is shaped like a funnel, with
adjustable vibration period,The dust settled
freely around the blowhole
4. An observation window is arranged on the door of the box to
observe the status of samples in the box
when the dust blowing stops
5. Controller: programmable controller (this controller has the
following kinds of arbitrary setting
control functions)
(a) Dust blowing time (stop, blow) h/m/s adjustable
(b) cycle time :any adjustable
(c) Preset test time :0s ~ 999h/99m/99s adjustable
(d) Power on: off -- on -- off
6. Simple parameter setting, no need to enter the program menu, can
directly enter the parameters menu
can be modified
7. The total time of test, interval time of dust blowing and period
of dust blowing can be controlled
8.The test tank and control cabinet are integrated, the lower part
is equipped with casters, other systems
are hidden, beautiful and generous
Equipment operating environment:
1. Temperature:15℃~35℃
2. Relative humidity:∠85%RH
3. There is no strong vibration and no strong electromagnetic field
around
4. No high concentration of dust and corrosive substances around
5. No direct sunlight or other direct heat radiation
6. There is no strong airflow around. When the surrounding air
needs to be forced, the airflow should
not blow directly on the box
7. The test chamber shall be placed smoothly and level
8. The installation site is well ventilated
9. Good grounding
