Active Member
|
[China]
Address: No.808, Haitong Road, Wenzhou Economical and Technological Development zone, Zhejiang, China
Contact name:Bryan
Wenzhou jhenten machinery co.,ltd |
|
|
Vacuum Wine Fermentation Tank , SS304 Or SS316 Biological Fermentation Tank
| JTRHJ Wine Fermentation Tank | |||
Wine Fermentation Tank strictly follow the Article 31, 32 of GMP general rules “Good Manufacturing Practice” (Revised in 2010), and according to the "pressure vessels" (GB150-2011), "steel welded normal pressure vessel (with standard definition)" (NB/T 47003.1-2009) requirements for the design, manufacture and acceptance. Wine Fermentation Tank use vertical circular tank body,the top is standard conical head,and top of tank body is equipped with dimple jacket ,can pumped in the cooling medium for circulating cooling; The lower of tank set mesh , filtering effect is better; the bottom is 60 ° ~ 90 ° inclination of conical head .It is not only good for wine liquid to bi-directional flow fast fermentation, but also is conducive to discharge yeast and impurity; At the bottom of the tank set mixing slag agitator used in the fermentation process and discharge process. | |||
| Tank Optional Configuration |
| Wine Fermentation Tank optional configuration: thermometer (digital display type or dial), sanitary manhole, in-outlet, sterile sampling valve, drain valve, level gauge, and liquid level self-control system (bearing module, non-contact ultrasonic, static pressure transmitting device), etc., or configured according to customers’ requirements. |
| Feature |
• There are 10m3, 19m3,25m3 varietys of specifications, it can be designed, customized according to the customers' requirements. • Jacket can put into chilled water (or cooling water), jacket is use dimple jacket; Jacketed outside covered with insulation layer, insulation material is PU (keep cold). • Connector use fast installation chuck (clamp), inner tank use SS304 or SS316L, the inner surface mirror polishing Ra≤0.28μm～0.6μm, outer surface can be polishing, wiredrawing ,sandblasting according to customer's requirement.
|
| Application | |
| • Suitable for wine fermentation . | |
| Design Parameter | |
| Design pressure | Normal pressure (tank body) 0.4MPa(jacket) |
| Design temperature | Normal temperature (tank body) 0℃～7℃(jacket) |
| Material | |
| Inner | 304,316L |
| Jacket | 304 |
| Insulation | PU(keep cool) |
| Feet | 304 |
| Connection | |
| In-outlet | Quick-open ,flange |
| Surface Finish | |
| Finish type | Mechanical polishing, electrolytic polishing, Sand blasting , pickling |
| Polishing precision | Inner wall 0.4μm,outer wall 0.6μm |
| Normal Model And Main Technical Parameters | |||||||
| Parameters | Model | JTRHJ—10 | JTRHJ—19 | JTRHJ—25 | |||
| Effective volume:m3 | 10 | 19 | 25 | ||||
| body | Diameter:mm | Φ2100 | Φ2400 | Φ2500 | |||
| Height:mm | 2438 | 3657 | 4876 | ||||
| Bottom cone type | 60° cone | ||||||
| Mixing | Motor power:kW | 5.5 | 7.5 | 7.5 | |||
| Mixing work RPM:r/min | 60(mixing, slagging integrated type)(The design can be adjusted according to customers’ usage) | ||||||
| The above-mentioned data is the standard ,for reference only. it can customize according to customer's requirements. | |||||||
