Active Member
|
[China]
Address: No.808, Haitong Road, Wenzhou Economical and Technological Development zone, Zhejiang, China
Contact name:Bryan
Wenzhou jhenten machinery co.,ltd |
|
|
| Industrial-Grade Filter | ||||
| ZTHF industrial-grade liquid filter mainly used in some larger flow situation, especially water treatment field. ZTHF big flow liquid filter has characteristic of large flow, small occupation area. Can effectively solve the traditional filter problem high costs input, the long replacement time, trouble operation and so on. | ||||
ZTHF big flow liquid filter can be divide into two kinds discrete and horizontal. Conventional 20', 40' filter filter usually adopt vertical structure, the flow of medium system more than 1000T/H. Choose horizontal structure and equipped with 60" filter cartridge, meet the large flow rate at the same time to reduce the the number of times of cartridge replacement. It is more convenient to replace filter.
| Feature | Application | ||||||||
| • Large flow, small occupation area, high efficiency | • Mainly used in some larger flow situation, especially water treatment field | ||||||||
• 304 and 316 l stainless steel are available, good corrosion | |||||||||
| • Vertical and horizontal two structures can choose | |||||||||
| Surface Finish | Operating Conditions | ||||||||||
| Treatment type | Mechanical polishing, | Max Operating pressure | 0.6MPa | ||||||||
| Polishing Precision | Inner wall 0.3μm, | Max Operating Temp. | 110℃ | ||||||||
| Material | Connection | ||||||||||
| Filter shell | 304, 316L | Shell connection | Flange ( Eyebolt) | ||||||||
| Vent valve, Drain valve | 304, 316L | Inlet /outlet N1, N2 | Quick install, flange | ||||||||
| Eyebolt | 304 | Pressure gauge N3 (optional) | 1”/1.5” Quick install | ||||||||
| Stabilizer blade | 304 | Drain valve N5 (optional) | 1”Quick install | ||||||||
| Sealing ring, gasket | EPDM, PTFE, Viton, Silicone | ||||||||||
| Dimension Parameters | 1pc | 2pcs | ||||
| 20” | 40” | 60” | 20” | 30” | 40” | |
| A:Shell length (exclude head) | 700 | 1200 | 1700 | 800 | 1300 | 1800 |
| B:Support center distance | 300 | 600 | 900 | 400 | 700 | 1000 |
| C:Diameter | Φ230 | Φ400 | ||||
D:The height form In-outlet N1, N2 | 355 | 395 | ||||
| In-outlet N1, N2 dimension | 2”/2.5”/3” | 3”/4”/5” | ||||
The above-mentioned data is the standard, it can customize according to customer's requirements.
| Selection Table | |||||||||||
［Type of | ［Model | ［Type | ［Filter | ［Shell material］ | ［In-outlet | ［O-ring］ | |||||
| ZTHF | L | 2R | 20 | S | 4 | K | E | ||||
| L=Vertical | 1R=1pc | 20=20”cartridge | S=226 type | 4= 304 | K=Quick install | E=EPDM | |||||
| W=Horizontal | 2R=2pcs | 40=40”cartridge | T=222 type | 6= 316L | F=Flange | P=PTFE | |||||
| 3R=3pcs | 60=60”cartridge | D=DOE type | L=Screw thread | V=Viton | |||||||
| 4R=4pcs | S=Silicone | ||||||||||
| 5R=5pcs | |||||||||||
