Active Member
|
[China]
Address: 3F, Huayang Bldg, Minwang Rd, Minzhi Sub-district, Longhua District, Shenzhen, Guangdong, China
Contact name:Tao
Fiberall Technology (Shenzhen) Co., Ltd |
|
|
FA-PC-MPMPS72 , MPO-MPO Fiber Optic Patch Cord 8 Connectors Each Side 12 Fibers Each Connector
Product Description
MPO is MT series compact design with small size and high density,
multi-channel is the most prominent feature, it is widely applied
to the CATV, Multimedia, Gigabit Ethernet, active device interface,
data processing networks, telecommunication networks, asynchronous
Transmission Mode (ATM). MPO patch cord can be ribbon fiber cable
or breakout bundle fiber cable, its high precision guide pins make
it can align precisely.
MPO/MTP is a high dense pre-terminated fiber optical connection
system and it is generally used in three areas.
1, Data center require high dense cabling
2, FTTB, optical fiber to the building
3, internal connector in fiber equipment such as ODN, 40G and 100G
SFP.
MTP/MPO fiber optic patch cords are multi fiber assemblies. Unlike
simplex or duplex patch cord, there are multi connections in one
MTP/MPO fiber optic jumper, for example, 4 fibers, 8 fibers, 12
fibers, etc. Typical MTP/MPO fiber optic assemblies is MPO-MPO,
MTP/MPO to 8 LC, MTP/MPO to 12 MT-RJ and so on. MTP/MPO fiber optic
patch cords are also available by single mode and multimode, PC and
APC polish.
Main Features Of MPO Fiber Optic Jumper
With standard12-fiber and 24-fiber MPO/MTP connector
Fiber type options : OS1, OS2, OM2, OM3 and OM4
End face polishing type: PC, UPC and APC
Available fiber capacity 12 / 24 / 36 / 48 / 72 / 96 / 144 cores
100% pass factory test before shipping
Discrete connectors are heat-cured and use ceramic ferrules and
sleeves
Fan-out fibers from MPO/MTP connectors into individual simplex or
duplex
High temperature stability
Product Specification
| Item | Parameters | |
| Fiber connector | MPO,MTP | |
| Fiber type | Single mode | Multi-mode |
| Cable Type | Ribbon flat fiber or round breakout fiber | |
| Available polishing | PC, APC | |
| Fiber count of each connector | Max 12 fibers | |
| Working wavelength | 1250~1650nm | 850nm, 1300nm |
| Test wavelength | 1310nm, 1550nm | 850nm, 1300nm |
| Insertion Loss | typical≤0.50dB,Max≤0.70 dB | typical≤0.40dB,Max≤0.50dB |
| Return Loss | APC≥50dB | PC ≥20dB |
| Repeatability | ≤0.10dB | |
| Interchangeability | ≤0.20dB | |
| Durability | ≤0.20dB typical change,500 mating | |
| Operating Temperature | -20ºC to +70ºC | |
| Storage Temperature | -40ºC to +85ºC | |
| Fiber height | 1000nm to 5000nm | |
| Ferrule length | 7.8mm | |
| Curvature | Long 1000mm short 50mm | |
