Active Member
|
[China]
Address: 3F, Huayang Bldg, Minwang Rd, Minzhi Sub-district, Longhua District, Shenzhen, Guangdong, China
Contact name:Tao
Fiberall Technology (Shenzhen) Co., Ltd |
|
|
FA-AD-LP2SP-S , SM Duplex Fiber Optic Adapter With LC Connector With Flange Or Without Flange
Why we need to change the adapter during frequent test? Since the frequent mating will bring dirt or dust into the sleeve and the end face of the fiber, and frequent plug and unplug may cause scratch on both sleeve and fiber end, continuous external force will cause replacement of the sleeve and it can not ensure the straight contact between two fibers. So in order to ensure accuracy of the test, we need to change the adapter, clear the dirt adapter and give up the adapter with scratch or sleeve replacement. Meanwhile the end face of the master cord also need to clear or repolish or change to new cord when it is necessary.
Main Features
1. Great repeatability and interchangeability.
2. Low insertion loss.
3. High reliability.
4. Compliant with IEC and RoHS standards.
5, With high quality sleeve.
6, High precision and alignment
Technical Parameters Of FA-AD-LP2SP-S
| Items | Conditions | Value (SM) | ||
| Optical properties | Insertion Loss | 1.31um LED light source | <0.3dB | |
| Return Loss | UPC | 1.31um LD light source | >50dB | |
| APC | 1.31um LD light source | >60dB | ||
| Mechanical properties | Impact test | 1.8m height | <0.1dB | |
| Vibration test | 10-60Hz, 1mm full amplitude | <0.1dB | ||
| Mating | >500 times | <0.1dB | ||
| Environmental features | High and low temperature cycle experiment | -40 to +80℃, 2 cycles
| <0.2dB | |
| High temperature test | 80+-2℃, 2 hours | <0.2dB | ||
| Salt spray test | 35℃, 5%RH, 48hours | <0.2dB | ||
