Active Member
|
[China]
Address: 1004-1005 Jiaanda Bldg, No.110 Huafan Rd, Dalang street,Longhua District,518109,Shenzhen China
Contact name:Kanglly Wong
OMC Industry Co.Limited |
|
|
12F FC APC G657A1 Single Mode Fiber Pigtails Fanout 0.9mm Tails IEM Grade B
Fiber Optic Pigtail 12F FC APC Single Mode G657A1 Flat Ribbon Fiber Pigtail Fanout 0.9mm Tails IEM grade B
Ribbon fiber flat cable use fiber ribbon as optical communication medium, the fiber ribbon wrapped with a layer of aramid yarn as strength member units, and the cable is completed with a flat PVC or LSZH jacket. Ribbon cables are designed for horizontal intrabuilding backbones where limited-smoke and zero-halogen requirements exist, especially used in optical communication equipment rooms and optical distribution frames, optical apparatus and equipment.
Standards of Ribbon Fiber Cable
Comply with standard GR-409, IEC 60794-2-30/31, meet the requirements of UL approval for OFNR.
Characteristics of Ribbon Fiber Cable
Aramid yarn as strength member cable has excellent tensile strength.
Compact structure with high fiber density, good performance of flexibility and crush resistance
The jacket anti-corrosion, anti-water, anti-ultraviolet radiation, flame-retardant and harmless to environment
All dielectric structure design, without electromagnetic induction effect
Scientific design with serious processing art.
Specification of Ribbon Fiber Pigtail
| Connector | FC | Jacket OD(mm) | 12cores: 5.0x2.5mm |
| Fiber Mode | 9/125μm | Jacket Color | SM:Yellow/Blue/White; |
| Polish | APC | Wavelength | SM:1310/1550nm |
| Cable Type | Multi-fibers Breakout 0.9mm unit cable | Jacket Material | LSZH/PVC/OFNR/OFNP |
| Insertion loss | ≤0.3dB(IEC Grade C) | Insertion loss | ≤0.12dB(IEC Grade B) |
| Return loss | SM APC ≥ 60dB(min) | Interchangeability &Vibration | ≤0.2dB |
| Operating temperature | -40~75°C | Storage temperature | -45~85°C |
Geometric Specification (only for 3D interferometer tested) of Ribbon Fiber Pigtail
| Items | Connector | PC End-face | APC End-face |
| Radius of Curvature | SC/FC/ST | 10~25 mm | 5~12 mm |
| LC/MU | 7~25 mm | 5~15 mm | |
| Apex Offset | ≤50 um | ||
| Fiber Spherical Height | +/- 100 nm | ||
| Angular Offset | ------ | 8°± 0.5° | |
End-face Quality (SM) of Ribbon Fiber Pigtail of Ribbon Fiber Pigtail
| Zone | Range (μm) | Scratches | Defects | Reference |
| A: Core | 0 to 25 | None | None | IEC 61300-3-35:2015 |
| B: Cladding | 25 to 115 | None | None | |
| C: Adhesive | 115 to 135 | None | None | |
| D: Contact | 135 to 250 | None | None | |
| E: Rest of ferrule | None | None | ||
End-face Quality (MM) of Ribbon Fiber Pigtail
| Zone | Range (μm) | Scratches | Defects | Reference |
| A: Core | 0 to 65 | None | None | IEC 61300-3-35:2015 |
| B: Cladding | 65 to 115 | None | None | |
| C: Adhesive | 115 to 135 | None | None | |
| D: Contact | 135 to 250 | None | None | |
| E: Rest of ferrule | None | None | ||
Length Tolerance of Ribbon Fiber Pigtail
| Overall Length(L)(m) | length of tolerance(cm) |
| 0<L<1 | +5/-0 |
| 1<L<10 | +10/-0 |
| 10<L<40 | +15/-0 |
| 40<L | +0.5% x L/-0 |
Application of Ribbon Fiber Pigtail
1. Optical fiber communication systems engineering
2. Fiber optic data communication network
3. Connected with trunk cables on one end, equipment port on the other end.
4. Connected with transfer modules on one end, equipment port on the other end.
Features of Ribbon Fiber Pigtail
1. 100% pre-terminated and tested in factory to ensure transfer performance.
2. Rapid configuration and networking, reduce installation time.
3. Supports 40G and 100G network applications.
4. Low insertion loss and added loss.
5. Supports up to 12F customized products are available.
6. High back loss, small volume, light weight.
7. End-face geometry and quality superior than IEC and Telcordia standards.
8. LSZH, OFNP, OFNR cable jacket.
9. Mechanical performance: IEC 61754-20 standard.
10. RoHS and REACH materials compliant.
