Guangzhou Tengsong Construction Machinery Equipment Co., Ltd |
Verified Suppliers
|
|
4M40 Engine Overhaul Gasket Kit ME996729
part number: | ME996729 |
For models: | 4M40 |
weight | 1.5KG |
Warranty period: | 1 year |
Quality: | high quality low price long life |
Gasket kit care introduction
1. Periodic Inspections: Periodically inspect the condition of the
gasket kit, especially at the inspection points specified in the
engine maintenance schedule. Check for oil leaks, coolant leaks or
other signs of abnormalities.
2. Well-maintained cooling system: Ensure that the cooling system
is operating properly and that the coolant level and quality meet
requirements. Regularly check the cooling effectiveness of the
coolant and the pressure of the cooling system to ensure that the
gasket kit does not become overheated or overpressured.
3. Standardize engine oil maintenance: Change engine oil and oil
filter regularly to maintain the lubrication performance inside the
engine. Use the appropriate engine oil recommended by the
manufacturer, adhering to change intervals and capacity
requirements.
4. Avoid Overheating and Excessive Pressure: Avoid overheating the
engine and excessively increasing pressure, which may cause damage
to the gasket kit. Follow the manufacturer's recommended operating
and loading requirements.
5. Pay attention to the tightness: If leakage or failure is found
in the gasket set, it should be repaired or replaced in time. Make
sure the gasket kit has a good seal to prevent fluid or gas leaks
and further damage to engine components.
6. Regular maintenance and cleaning: Perform regular engine
maintenance and cleaning to ensure parts around the gasket kit are
clean and remove accumulated dirt and oil.
engine introduction
The 4M40 is a general-purpose diesel engine produced by Mitsubishi
Motors Corporation. It is widely used in various vehicles such as
cars, trucks and SUVs. The following is some basic information
about the 4M40 universal engine:
1. Engine type: The 4M40 engine is a four-stroke, in-line
four-cylinder, turbocharged, diesel engine.
2. Displacement: The usual 4M40 engine displacement is 2.8 liters
(2835cc).
3. Power and Torque: Specific power and torque outputs vary by
vehicle model and application. Typically, the power of a 4M40
engine ranges from 90 to 130 horsepower and the torque ranges from
200 to 300 Nm.
4. Technical features: The 4M40 engine uses technologies such as
direct injection fuel system, turbocharging and intercooler to
provide higher power output and fuel economy.
5. Application scope: 4M40 engine is widely used in various vehicle
models, including cars, SUVs, trucks and off-road vehicles. It is
widely used in some Mitsubishi models, such as Pajero (Pajero) and
L200 (Triton).
6. Maintenance and care: For the maintenance and upkeep of the 4M40
engine, it is recommended to perform regular maintenance in
accordance with the manufacturer's service manual and
recommendations. This includes changing oil and filters, checking
and adjusting belt tension, cleaning and maintaining the cooling
system, and more.
Company Profile