|
[China]
Trade Verify
Address: Area A, 9th Floor, Building G, Guancheng Low Carbon Industrial Park, Shangcun Community, Gongming Street, Guangming District, Shenzhen, China, 518106
Contact name:Kiwi Xiao
Shenzhen Juyi Science And Trade Co., Ltd. |
|
Verified Suppliers
|
|
|
Enerkey 100V 150V 200V 50A Waterproof Potting Module Diode Module Solar Battery Anti-Backflow Protection
There are three primary applications for ideal diodes: Diode OR for high-reliability redundant power supplies. Diode OR selection circuit between the on-board battery and a wall charger. Simple reverse-polarity protection for battery-operated devices.
In electronics manufacturing and assembly, potting materials are compounds that can fill and seal cavities in electronic assemblies. By doing so, potting compounds protect components from vibration and shock.
Let's take a closer look at electronics "potting." In essence, it's like creating a suitable "pot" to put electronics in, then filling that pot with special curable liquids (like epoxies, polyurethanes, or silicones) that have thermal insulation and adhesive structural properties.
Enerkey Waterproof potting module 100V 150V 200V 50A
Photovoltaic Solar Base Station Industrial Control Electric Car
Battery in Parallel For Battery charging anti-backfilling | |||
| Product model | EK-iD100V50AW | EK-iD150V50AW | EK-iD200V50AW |
Working voltage range | 30-100V | 30-150V | 30-200V |
Product Size(mm) | L74.5xW76.5xT31 | L74.5xW76.5xT31 | L74.5xW76.5xT31 |
Weight with box | 0.8kg | 0.84kg | 0.88kg |
| MOS quantity | 2 | 2 | 2 |
Battery Type | NCM/LFP/LTO | NCM/LFP/LTO | NCM/LFP/LTO |
Continuous current | 50A | 50A | 50A |
| Peak starting current | 100A | 100A | 100A |
Quiescent operating current | 0.1-1.5mA | ||
Copper foil thickness | 2.0 oz | ||
PCB material | Aluminum plate | ||
| Working principle | The input and output are equivalent to diodes. It detects that the output voltage is greater than the input and immediately turns off the output. The detection value is at the millivolt level and the response speed is very fast. | ||
Application | 1. Solar panels prevent backflow (anti-backflow); 2. Battery charging prevents backflow (anti-backflow) (anti-backflow); 3. DC-DC constant voltage and constant current module output prevents backflow 4. Other occasions where backflow prevention (anti-backflow) is required | ||
| Accessories | Pure copper silicone wire*3 IN+/OUT+ red silicone wire: 10AWG(5.5 sqm) 40CM Screw M5 GND black silicone wire: 16AWG (1 sqm) 40CM screw M6 | ||
Operating Temperature | -40℃ ~ +60℃ | ||
Special Note:
1. This version is the latest optimized version. The module will
not be burned if the positive and negative poles are connected
reversely, which improves the safety of installation;
2. The ideal diode is a diode with ultra-low internal resistance as
the name implies. The conduction voltage drop of ordinary diodes is
more than 0.6V. The conduction voltage drop of an ideal diode is
almost negligible.
3. The copper foil layer and aluminum base layer of the aluminum
substrate PCB traces are insulated with a withstand voltage of
1000V, so there is no need to worry about breakdown problems. The
thermal conductivity is 20 times faster than FR4 glass fiber, and
can be directly attached to the large heat sink.
4. This ideal diode module cannot be used in rectifier circuits!
5. The waterproof potting module has a thickened radiator, which
has higher heat dissipation efficiency and lower continuous current
heating. It is suitable for modification enthusiasts!
Q1. Why did we choose you?
* We can provide you with efficient after-sales service, with more than 10 years of strong technical support.
* Products have passed FCC, CE, ROHS and other international standards certification.
* We can provide you with factory price, Welcome you to visit our factory and production process.
Q2. What is your product range (type)?
*We mainly do battery management systems in the fields of power batteries, energy storage batteries and consumer batteries.
*Mainly used for LFP, Li-ino and LTO batteries.
Q3: How do I know which kind of material & type my battery is ?
*Please look the battery body, If the normal voltage of your battery shows 3.2V, The battery is LiFePo4.
*If the normal voltage of your battery shows 3.6V or 3.7V, the battery is Li-ion or Lto battery.
Q4. Do you have minimum order requirements?
Can it be customized? What is the lead time for samples and batches?
*Our minimum order quantity is 1 piece, ODM customization is available.
* 1~3 days delivery of existing samples, 3~10 days delivery of customized samples.
Q5: What if i can't use it?
*Regular products have instructional videos, We can also support online video call guidance from engineers.
Q6. What are your terms of payment?
*We accept wire transfer and cash payment, all negotiable. Payment method :visa, mastercard, T/T, PayPal, APPLE_PAY, GOOGLE_PAY, GC_REAL_TIME_BANK_TRANSFER, RMB
Q7. How do you guarantee the quality?
* All our products are subjected to professional laboratory 100% testing, as well as repeated aging tests.
* Obtained FCC, CE, ROHS and other international standard certification.
* Provide 3 years after-sales warranty service. Free spare units for replace in 3 years.
Q8. How to choose a BMS suitable for our battery?
*Depending on the voltage and current that matches your battery, you can consult our customer service and we will provide it for you equipped with the most suitable battery management system.
Q9. How can i contact you?
*We have 7x24 hours online service, Please leave us a message online.
*You can also contact us by Email, WhatsApp, WeChat, etc(see below). We are so glad to work with you.
