Active Member
|
[China]
Address: Room801 Qunyinghui Building #3, JinFu Rd. No.3 2, DaXing Economic Development Zone, Beijing. 102600
Contact name:victor
Beijing Globalipl Development Co., Ltd. |
|
|
Radio Frequency Fractional CO2 Laser Machine Far-infrared For Syringoma Removal Harmless
Specification
Basic Specification | |
Wavelength | 10.6μm, far-infrared laser |
Display | LCD 5.6inch |
Pulse Frequency | 33.3 Hz |
Duration | 0.1-10 ms |
Distance | 0.1-2.6 mm |
Interval | 0-6s |
Repeat | 1-5000 ms |
Overlap | 1-20 times |
Average Power | 30W |
Working Mode | Continuous pulse, single pulse, interval pulse |
Scan Graphics | Oval, Linear, Rectangle, Square, Triangle, Hexagon, and Round. |
Dot Quantity | 400 dots at most |
Working State | Hyper-pulsed mode |
Scan mode | Random, Sequence, and the Maximum Distance |
Pulse Energy | 10mj to 130mj is optional for each dot |
Penetrability | 5-6mm |
Technical Specification | |
Condenser Focus | F=50mm |
Beam divergence angle | 0.3mrad |
Spot Size | 0.2mm |
Aiming Beam | Less than 2Mw, 635nm red semiconductor laser |
Cooling System | Closed Loop Circulating Water + Air |
Environment Temperature | 5-40°C |
Relative Humidity | <80% |
Temperature in Transit | -40-50°C |
Humidity in Transit | <85% |
Beam Transport Device | 7-joint articulated arm and balance weight |
Atmospheric Pressure | 86.0kpa-106.0kpa |
Warming up Time | 2 Min |
Electromagnetic Requirement | No electromagnetic, Field interference |
Size of Machine | 32X32X63cm |
Net Weight | 21kgs |
Power Supply | 220V/110V |
Applications:
1. Skin renewing and resurfacing
2. Wrinkle removal, skin tightening
3. Acne and acne scar removal
4. Smooth burnt scars and surgery scars, etc
5. Remove intractable chloasmas and pigmentation
6. Sun damage recovery
Features:
1.Radio frequency co2 fractional laser
2. Individual design of laser structure, greatly facility laser replacement and easy daily
manintenace
3. Display: 8.4" color touch LCD screen
4. Humanized software control, stable laser output, more safety
5. Smart articular arm, high accuracy
6. Excellent performance, not affect people's normal life and study
7. Packing: aluminum alloy case
Theory
Unlike traditional laser, fractional laser will only cover part of the skin tissue, leaving the
surrounding tissue intact, and then cause a series biochemical reactions inside the skin, thus
to reach the results of skin lifting & resurfacing, pigments and scar removal, etc, finally let the
skin return to young again. The unaffected areas act as a reservoir for more effective and rapid
tissue healing and collagen production, thus lift the skin and removes speckles and pigments.
a) Red areas are the zones of ablation in fully ablative standard resurfacing, which need
longer healing time;
b) Red areas are the microscopic treatment zones (MTZs) of fractional photothermplysis
(FP) and the blue areas are the bridge of intact, unaltered skin which will stimulate collagen production, thus faster recovery as well as enhance effective.
c) White dots are fractional laser on skin.
