|
[China]
Trade Verify
Address: No. 317, Yichun South Road ( Happiness Park), Yuanzhou District, Yichun, Jiangxi, 336000, China
Contact name:Penny Peng
Pego Electronics (Yi Chun) Company Limited |
|
Verified Suppliers
|
|
|
Portable Medical Equipment Handle Strength Test Apparatus as Per IEC60236-1-2018 clause 8.8
1. Introduction
The handle strength test apparatus is designed to meet the test requirement of to IEC60236-1-2018 clause 8.8, GB9706.1-2007 clause 21. It’s applied to test the strength of handle for lifting or carrying the equipment, like of portable medical equipment.
A weight exerts a force of 3 times or 2 times the weight of the equipment shall be uniformly applied over a 75mm width at the centre of the handle, without clamping. The additional weight shall be started at zero and gradually increased so that the test value is attained in 5s to 10s and maintained for 60s. After the test, the handle shall not break, crack, or detach from the equipment.
2.Specification
| Control way | Button + meter |
| Station | 1 |
| Test drive | Infinitely adjustable speed motor |
| Range of tension | 0-1500N Accuracy: ±0.5N |
| Time counter | 1-10s |
| Holding time | 1-99s |
| Test specimen | One handle or multiple handles |
| Induction method | force sensor |
| Force display | The instantaneous force value of the sample can be displayed during the test The maximum force value of the sample can be displayed after complete the test |
| Protection device | the upper and lower limits of the stroke will automatically stop and the protection force value has the function of automatic zero reset, no need to adjust the zero after changing the fixture |
| Working power | AC220V/50Hz |
| Weight applied as per IEC60236-1: 2018 clause 8.8 | a. for MS1 equipment with two or more handles, a weight that exerts
a force of three times the weight of the equipment; |
