|
[China]
Trade Verify
Address: No. 317, Yichun South Road ( Happiness Park), Yuanzhou District, Yichun, Jiangxi, 336000, China
Contact name:Penny Peng
Pego Electronics (Yi Chun) Company Limited |
|
Verified Suppliers
|
|
|
IEC60335-2-7 PLC Control Door and Interlock Endurance Testing Equipment for Washing Machine
1. Introduction
Washing machine door endurance test machine can meet the requirement of IEC60335-2-7 clauses 18.101 and 22.104, IEC60335-2-11 clause 20.101 and IEC60335-2-4 clause 18, it is a special test equipment applied to life test of lid or door interlock of various washing machines and tensile force test when the interlock device acts to lock the door. The washing machine door endurance test machine can be set flexibly as per different washing machine. The test machine adopts PLC controller and touch screen, and the motor drives the transmission rod to reciprocate the switch movement. It can independently realize the reciprocating action of "opening and closing" the lid and door of washing machine. The rack is made by high grade aluminium alloy, and the door is fixed by a vacuum suction cup structure, which is easy to operate and easy to control.
2. Test principle:
Use the edited program to control the power-on and power-off of the interlocking device, drive the mechanical arm through the motor, and drive the door or lid that is sucked by the vacuum suction cup to reciprocate opening and closing at a certain speed, so as to verify the reliability of the interlocking device. A force sensor is installed on the mechanical arm, which forms a closed-loop control with the servo motor, and can precisely control the closing force value.
3. Parameter
| Test stations | 2, can independent test the drum washing machine and pulsator washing machine |
| Control system | PLC+7 inch touch screen |
| Drive mode | Servo motor |
| Sample clamping mode | vacuum suction cup, drive by pneumatic (user prepare the air compressor 0.5-0.7Mpa) |
| Speed of opening | 0-3600/s (1.5m/s) presettable |
| Opening angle | 0-1300 presettable |
| Test cycles | 0-999999 presettable |
| Opening and closing force | 0-200N presettable (The opening force is only for the tension test when the interlock device acts to lock the door) |
| Supply mains | 0-250V adjustable |
| Test sample and its limitation | Electric tumble dryer, electric washing machine (includes drum washing machine with single-phase voltage≤250V, others ≤480V) Centrifugal Dehydrator (load capacity ≤10KG, roller linear speed≤50m/s, single phase voltage≤250V, others ≤480V) |
| Equipment structure | a. Consisted by electrical control cabinet (built-in Load voltage regulator), test racks equip with mechanical arm b. the drum washing machine and pulsator washing machine can be placed in 2 independent test racks, the test can be performed independently. c. Dimension: L2500mm*W1300mm*H1300mm b. Weight: 180kg |
| Working condition | a. power supply: AC220V±10%/50Hz, 6KW b. Working conditions: 5-40℃ (A.T.), 20-80% R.H., 80-106kpa |
| Protection device | Leakage protection, over-load protection, short-circuit protection |
