|
[China]
Trade Verify
Address: No. 317, Yichun South Road ( Happiness Park), Yuanzhou District, Yichun, Jiangxi, 336000, China
Contact name:Penny Peng
Pego Electronics (Yi Chun) Company Limited |
|
Verified Suppliers
|
|
|
IEC60884-1 Clause 23.2 Power Cord Anchorage Torque Test Apparatus - Accredited by Third-Party Lab
1. Introduction
The power cord anchorage torque test apparatus is designed according to IEC60884-1 clause 23.2 (table 18) and VDE0620 clause23.2(table18). It’s used to test the power cords and flexible cables of household appliance and similar appliance. The torque test shall be carried out after the completion of retention test. The flexible cable is subjected for 1 min to a torque as specified in table 18. After the tests, the flexible cable shall not have been displaced by more than 2 mm. For rewirable accessories, the end of the conductors shall not have moved noticeably in the terminals; for non-rewirable accessories, there shall be no break in the electrical connections.
For measurements of the longitudinal displacement, a mark is made on the flexible cable at a distance of approximately 20 mm from the end of the specimen or the flexible cable guard, before it is subjected to the pull.
If, for non-rewirable accessories, there is no definitive end to the specimen or the flexible cable guard, an additional mark is made on the body of the specimen.
The displacement of the mark on the flexible cable in relation to the specimen or flexible cable guard is measured while the flexible cable is subjected to the pull.
2. Parameters
| Torque disk diameter | 100mm |
| Weight | 2N/3N/5N/7N/8.5N*1 |
| Torque range | 0.1N.m, 0.15N.m, 0.25N.m, 0.35N.m, 0.425N.m |
3. Torque Test Values for Cord Anchorages (table 18 IEC60884-1)
| Rating of plug or portable socket-outlet | Flexible cable (number of cores x nominal cross-sectional area in mm2) | ||||
| 2x0.5 | 2x0.75 | 3x0.5 | 3x0.75 | (2 or more)x1 | |
| Up to and including 16A and 250V | 0.10Nm | 0.15Nm | 0.15Nm | 0.25Nm | 0.25Nm |
| 16A -and above 250V | - | - | - | - | 0.35Nm |
| Above 16A | - | - | - | - | 0.425Nm |
4. Third-Lab Calibration Certificate
5. COMPETITIVE ADVANTAGE
1). PEGO is professional on electrical lab testing equipment, our
goal is to provide our customers with better price, better quality
and better service.
2). Customized Service: We can help our customers to design and
develop new equipment according to their requirement. We are
flexible and capable Supplier.
3).Excellent Quality: 12 months warranty, 100% guarantee test
before delivery. And all our products can pass the third-lab
calibration which is authorized by ISO17025.
4). After Sales Service and Technical Assistance: 24 hours
technical support by email. Our professional team is always here
willing to be your technical consultant.
5). Quick Delivery: Our company provides just-in-time delivery, and
our freight forwarder can provide transportation services at the
most reasonable price to solve your worries.
6). Prompt Response to Customers: we promise to reply our customers
within 24 hours
