|
[China]
Trade Verify
Address: No. 317, Yichun South Road ( Happiness Park), Yuanzhou District, Yichun, Jiangxi, 336000, China
Contact name:Penny Peng
Pego Electronics (Yi Chun) Company Limited |
|
Verified Suppliers
|
|
|
IEC60695-2-20 Hot Wire Ignition Test Apparatus /Fire Hazard Testing Equipment
1. Introduction
The hot wire ignition test apparatus is designed according to the standards of IEC60950, IEC60695-2-20, UL60950, ASTMD3874 and etc.. The hot wire ignition test uses a heating wire of a specific size (Φ0.5 mm* 250 mm) and a specific material (Ni80/Cr20), after pre-annealing with specified heating power (0.26W/mm) and the specified time (8s~12s), the hot wire is wound five times on the sample with a certain winding tension (5.4N) and a certain winding spacing (6.35mm), then the sample with the hot wire wound at the specified heating power (0.26W) )test for 120 s, the fire risk is assessed by whether the sample is ignited or the time taken to ignite. The hot wire ignitio test apparatus is applied to the industries of lighting fixtures, low voltage appliance, household appliance and etc., and also applied to insulating material, and electrical connector.
The hot wire ignition test apparatus is controlled by single chip and push buttons. The test apparatus is built-in air exhaust, the exhaust fan automatically draws air when power on, and automatically run for 2 minutes when power off. The front panel is transparent for easy observation of the experimental process.
2. Parameter
| Hot wire | 1). size: Φ0.5mm in diameter, 250mm in length 2). Cold resistance: 5.28Ω/m 3). Material: 80% nickel / 20% chrominum |
| Annealed stent spacing | 250mm |
| Test fixture | 70mm pitch, 60mm height |
| Winding tension | 5.4N±0.2N |
| Winding space | 6.3±0.2mm |
| Annealing time | 8-12s |
| Test time | 0~999.9s (presettable, digital display, normally 120s) |
| Test power | 0.26±0.01W/mm (digital display) |
| Test specimen | 125*13*3mm |
| Test chamber | 0.5m3 ( customizable 0.75m3, 1m3 according to difference standards), draught-proof and dark background,with exhaust fan |
| Dimension | 1000mm*650mm*1300mm |
| Standard | IEC60950, IEC60695-2-20, UL60950, ASTMD3874 |
| Working Power | 220V/50Hz |
3. Picture
4. COMPETITIVE ADVANTAGE
1). PEGO is professional on electrical lab testing equipment, our
goal is to provide our customers with better price, better quality
and better service.
2). Customized Service: We can help our customers to design and
develop new equipment according to their requirement. We are
flexible and capable Supplier.
3).Excellent Quality: 12 months warranty, 100% guarantee test
before delivery. And all our products can pass the third-lab
calibration which is authorized by ISO17025.
4). After Sales Service and Technical Assistance: 24 hours
technical support by email. Our professional team is always here
willing to be your technical consultant.
5). Quick Delivery: Our company provides just-in-time delivery, and
our freight forwarder can provide transportation services at the
most reasonable price to solve your worries.
6). Prompt Response to Customers: we promise to reply our customers
within 24 hours
