|
[China]
Trade Verify
Address: Room 502, Unit 2, Building 1, Yi Cui yuan i city, No. 11, Tangyan South Road, Yanta District, Xi'an city, Shaanxi Province, China.
Contact name:Wang
Xi'an Desun Uniwill Electronic Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
RS485 Nitrate ion selective electrode NO3 ion sensor nitrate sensor electrode Ion Selective Eectrode Method
Overview
Features
| Item | Parameters |
| Model | DSN260 |
| Ammonia Nitrogen Range | 0~1000mg/l |
| Ammonia Nitrogen Precision | 3% |
| Ammonia Nitrogen Resolution | 0.1mg/l |
| Nitrate Range | 0~50mg/L |
| Nitrate Precision | 5% |
| Nitrate Resolution | 0.1mg/l |
| pH range | 1~12 |
| pH Accuracy | ±0.1 |
| pH Resolution | 0.01 |
| Deepest depth | Underwater 10m |
| Protection level | IP68 |
| Temperature range | 0~50 |
| Sensor interface | Support RS-485, MODBUS protocol |
| assembly | Input type |
| Power information | DC 5~12V, current <50mA |
| Probe cable length | 10 meters (default), can be customized |
| Housing material | POM |
Maintenance method
Sensor maintenance
1) External surface of the sensor: Wash the external surface of the sensor with tap water. If debris remains, wipe it with a moist soft cloth.
2) Check the cable of the sensor: The cable should not be tight during normal work, otherwise the internal wires of the cable will be easily broken and the sensor will not work properly.
3) Sensor storage: When the sensor is not in use, you should fasten the black plastic cap and check whether the sponge inside is wet. If it is not wet enough, please add 3mol / L potassium chloride solution and let the electrode be stored in the solution with potassium chloride.
Cable definition
Probe size
26x167.5 mm(Φ xL)
Power information
Power supply must be DC 5-12v + / - 5%, current < 50mA
Cable information
4 wire awg-24 or awg-26 shielding wire. Od = 5mm
