OEM NAO Brake Pads Green Test for Commercial or Passenger Vehicle

OEM Ceramic Brake Pads Green Test for Commercial or Passenger Vehicle
 
 

1, Definition of Vehicle Brakes
Automobile brake pad refers to the friction material fixed on the brake drum or brake disc that rotates with the wheel, in which the friction lining and friction lining block bear external pressure and produce friction effect so as to achieve the purpose of vehicle deceleration.
The braking principle is mainly from the friction, using the brake pad and brake disc (drum) and the friction between the tire and the ground, the kinetic energy of the vehicle into the heat after the friction, the car will stop.A good and efficient braking system must be able to provide stable, adequate and controllable braking force, and have good hydraulic transmission and heat dissipation ability, to ensure that the driver from the brake pedal applied force can be fully and effectively transferred to the main pump and sub-pump, and to avoid high heat caused by hydraulic failure and brake recession.There are two major types of brake systems, disc and drum, but apart from the cost advantages, drum brakes are far less efficient than disc brakes.

2, Types of Vehicle Brakes
1), Commercial Vehicle Brakes:
Commercial Vehicle---Drum Brake Linings
Commercial Vehicle---Disc Brake Pads
2), Passenger Car Brakes:
Passenger Car---Drum Brake Linings
Passenger Car---Disc Brake Pads
3), Motorcycle Brakes:
Motorcycle---Drum Brake Linings
Motorcycle---Disc Brake pads
 
 
 
3, Brake Performance
1). Braking performance: friction coefficient (FF level: 0.35-0.45) braking force: braking force, braking sensitivity
2), wear resistance: wear rate (6-100,000km) wear resistance.(with driving habits, road conditions, climate, brake disc material (different models, brake disc material is different, the weight of the car is different)).
3). Comfort: whether there is noise, whether there is a sense of braking, whether it is smooth.
4). Thermal recession: whether it is heat resistant -- the degree of thermal recession.
5). Shear strength: whether it falls off, whether it is easy to break, the density, whether the density is balanced, whether there are bubbles and gaps.
Other items: whether damage brake disc, whether waterproof - water recession degree, whether environmental protection, and brake disc fitting degree.
 

4, Brakes Production process
1). Production process of drum brake linings for commercial vehicles:
Stir ingredients -- -- -- -- -- - > pressure molding (pressing blank + pressure molding) -- -- -- -- -- -- -- -- -- -- -- - > > heat treatment chamfering, grinding inside arc -- -- -- -- -- - > -- -- -- -- -- - > drilling grinding outer arc rubbing surface -- -- -- -- -- - > brush ash printed label -- -- -- -- -- - > thermoplastic packing -- -- -- -- -- - > artificial packing packaging
2). Production process of disc brake pads for passanger cars:
Ingredients stirring + polishing of the steel back -- -- -- -- -- - > glue -- -- -- -- -- - > pressure molding - -- -- -- -- -- -- -- -- -- -- - > > heat treatment friction surface grinding, chamfering, slot -- -- -- -- -- - > spray painting -- -- -- -- -- - > the silencing pills -- -- -- -- -- - > surface coated -- -- -- -- -- > spring, three jaw -- -- -- -- -- - > thermoplastic packing -- -- -- -- -- - > artificial packing packaging
3). Production process of disc brake pads for commercial vehicles:
Ingredients stirring + polishing of the steel back -- -- -- -- -- - > glue -- -- -- -- -- - > pressure molding - -- -- -- -- -- -- -- -- -- -- - > > heat treatment friction surface grinding, chamfering, slot -- -- -- -- -- - > spray painting -- -- -- -- -- - > laser marking loading -- -- -- -- -- - > spring -- -- -- -- -- - > thermoplastic packing -- -- -- -- -- - > artificial packing packaging

Commercial vehicle brake pad
● Low dust formula and low noise

● High temperature, the lowest wear rate, long life

● Ceramic materials, braking distance is short,excellent braking performance

Passenger car brake pad
● Excellent and stable braking performance
● Excellent heat resistance, excellent braking performance even at high temperatures
● Small damage to the disc, do not often replace the disc
● It is not easy to have sound or noise
wear resistance, can run longer mileage
● Metal free, stable performance in extreme cold and hot climateHeat treatment
● Intelligent digital display temperature control instrument, PID parameters self-adjusting, solid-state relay, the heating process is done automatically.
● Independent super temperature automatic alarming system
● Real-time supervision, trend chart is done automatically, easy for fault solving.

 
Zhengzhou Baiyun Industrial Co., Ltd.

Zhengzhou Baiyun Industrial Co., Ltd., since 1977, is a national high-tech enterprise with main products of brake friction material and brake products. For more than 40 years, Baiyun focus on the R&D, production and selling of brake linings & pads for commercial vehicles and passenger cars, fighting for human traffic braking safety. Till now, Baiyun has become an important supporting supplier and partner of many famous domestic and overseas auto brands. Baiyun has also reached long term strategic cooperation with many famous domestic and overseas auto parts distributors.
Zhengzhou Baiyun Industrial Co., Ltd., is one of the leading auto friction braking enterprise in China, Top 10 enterprises of China Friction Material Industry and member of friction industry association. Baiyun has passed ISO9001 Quality Management System and IATF16949 Auto Industry Quality System Certification. Long-term cooperation is established with international authoritative test organizations such as America LINK and GREEN to test Baiyun brakes regularly. There are more than 1000 models brakes of Baiyun have obtained E-mark certification till now.
Baiyun will insist on the enterprise mission "create value for customers, create happiness for employees" continuously forge ahead, and create a more brilliant future.
 
 
FAQ
 
Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.
Q3. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
Q4. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures
Q5. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.