Active Member
|
[China]
Address: The Industrial Demonstration Zone, Gongyi City, Henan, China
Contact name:Tim Wang
Zhengzhou Baiyun Industrial Co., Ltd. |
|
|
Rear Brake Pad 0.35~0.45 Friction Coefficient For Common Cars / SUV Cars
Zhengzhou Baiyun Industrial Co., Ltd.
Disc Ceramic Brake Pads
Disc brakes are generally used in passenger cars, but due to their stable performance at higher speeds and resistance to brake fade, they are gradually spreading into the commercial vehicle segment, where drum brakes were traditionally chosen for their longer service life. There is increasing demand from customers for longer service life and higher quality, and Baiyun is committed to meeting them through further development of the disc brake’s reliability. There are two types of disc brakes.
The "opposed piston type disc brake" has pistons on both sides of the disc rotor, while the "floating type disc brake" has a piston on only one side. Floating caliper type disc brakes are also called sliding pin type disc brakes.
China Top Ceramic Rear Brake Pad For Common Cars & SUV Cars & MPV Cars
China Top Ceramic Rear Brake Pad For Common Cars & SUV Cars & MPV Cars
Feature of BAIYUN Ceramic Rear Brake Pads
● Excellent and stable braking performance
● Excellent heat resistance, excellent braking performance even at high temperatures
● Small damage to the disc, do not often replace the disc
● It is not easy to have sound or noise
wear resistance, can run longer mileage
● Metal free, stable performance in extreme cold and hot climate
| Item | Feature |
| Powder Coat & Zinc Dichromate Coat | Superior corrosion resistance and smooth brake engagement. |
| Friction Material | Excellent formulations deliver superior stopping power and durability |
| Surface Preparation | Diamond ground for exceptional surface conditioning and flatness. |
| Bonding Layer | Excellent adhesive and bonding material |
| Backing Layer | Special backing material to get thermal-protective layer |
| Steel Backing Plate | OED standard backing plate |
| Shim | Dampen noise and hot |
| PAD CHAMFER | Engineered to eliminate noise and vibration. |
| Metarials | Ceramics |
Automatic Weighing& Mixing System of Ceramic Rear Brake Pad
Adopting the full automatic weighing& mixing system with computer display and control. Before feeding raw material, there is bar code scanning to avoid wrong material feeding. The afterwards weighing, delivery, mixing, separate are all automatic. The formula quality is guaranteed, labor load is reduced.
Equal Ratio Pressure Hot Pressing Unit Of Ceramic Rear Brake
Pad
Features:
● Each station’s hydraulic and electric controlled separately.
● Each station 4-8 antrum molds are equal ratio pressed. Same
density of every pad is guaranteed.
● All process parameters display on screen.
● Real-time online control. Fault & overlimit will result in
automatic alarming.
Equal Ratio Pressure Hot Pressing Unit Of Ceramic Rear Brake Pad
Features:
● Each station’s hydraulic and electric controlled separately.
● Each station 4-8 antrum molds are equal ratio pressed. Same
density of every pad is guaranteed.
● All process parameters display on screen.
● Real-time online control. Fault & overlimit will result in
automatic alarming.
Test Results of BAIYUN Passenger Cars Brake Pad
