Active Member
|
[China]
Address: No. 12, Chuangxing Road, Baisha, Humen Town, Dongguan, Guangdong, China
Contact name:Calin Deng
GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. |
|
|
Hemiplegia NC feeder, stamping die material, automatic feeding equipment
The yaw NC feeder is the most commonly used automatic feeding
device for wafer blanking. It drives the feeder to the left and
right yaw by swinging the platform, so that the blanking position
of the wafer can be rounded and cut, maximizing the material
utilization. rate.
In order to achieve efficient blanking and stamping, the feeding
direction of the sitting mode of the sitting method must be
converted to the XY vertical axis coordinate, in order to achieve
multiple circular and circular tangent. Ruihui Machinery realizes the mathematical operation by establishing mathematical
models and formulas. With this conversion, we have designed two
efficient processing methods, S-type and M-type, to achieve optimal
layout.
When the coil is set in the heavy material frame, the cylinder is under the control of the solenoid valve, and the piston rod of the cylinder moves to move the movable slider on the main shaft to extend the tray of the tray while the tray of the tray moves in the inner hole of the coil. The coil is tightened to achieve the purpose of tightening the coil.
The hydraulic heavy-duty material frame adopts the swallow-tailed inclined slider hydraulic expansion and contraction structure. The hydraulic cylinder is used to push and pull the pyramid mandrel, and the tile of the reel is driven to move radially, so as to achieve the purpose of shrinking and shrinking the tray, which can not only be quickly installed. Disassemble the coil to ensure smooth loading and unloading of the coil.
Moreover, the fixed reel can be kept in tension and fixed connection with the rotating component of the material frame, thereby facilitating the rotating part of the material frame to drive the coil to rotate coaxially.
Products:
Specification:
| Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
| Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
| Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
| Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
| Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
| Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
| Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
| Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
| Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
| Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
| Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
| Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
| Power(V) | 3 Phase 220V/380V/50HZ | |||||
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 | ||
Straigtening performance:
| tock Thicknees (mm) | Stock Width (mm) | |||
| 0.3 | 400 | 500 | 600 | 800 |
| 0.4 | ||||
| 0.6 | ||||
| 0.8 | ||||
| 1.0 | ||||
| 1.2 | ||||
| 1.4 | ||||
| 1.6 | 470 | 470 | ||
| 1.8 | 400 | 400 | ||
| 2.0 | 360 | 360 | ||
| 2.3 | 300 | 300 | 300 | 300 |
| 2.5 | 230 | 230 | 230 | 230 |
| 2.8 | 150 | 150 | 150 | 150 |
| 3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is
provi
