Active Member
|
[China]
Address: No. 12, Chuangxing Road, Baisha, Humen Town, Dongguan, Guangdong, China
Contact name:Calin Deng
GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. |
|
|
Unwinding stamping, spring splint stamping, Guangdong Ruihui Feeder
Heavy-duty material frame, which is equipped with a tensioning
tensioning device in front of the heavy-duty material frame, which
is used to tension the material. The Ruihui heavy-duty material
frame is always kept constant. Tension, at the same time, the
ordinary A-type iron is used as a large-size material A-type iron
for receiving materials, ensuring that the material is reliable and
truly stable and reliable.
When Ruihui uses the heavy-duty material frame, the material frame motor rotates, and then the tensioning wheel
rotates, and the tensioning motor rotates slowly when the
tensioning wheel rotates the belt from the tensioning device. The
tight tape causes the tape to be tensioned and not loose, so that
the heavy material frame can smoothly wind the tape, and at the
same time, the tensioning device can convey the speed of the tape.
The tensioning speed of the tension motor is adjusted by the
control device so that the tensioning wheel can tighten the belt
one by one, and when no belt is conveyed, the control device
controls the driving of the driving motor to drive the tensioning
wheel to rotate, and the driving speed of the driving motor
Quickly, the tensioning wheel actively rolls the tensioning belt to
provide the material roll winding receiving belt, and the control
device adjusts the active motor tensioning speed, so that the
tensioning wheel can roll the tensioning belt one by one to ensure
the quality of the winding.
Specification:
| Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
| Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
| Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
| Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
| Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
| Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
| Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
| Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
| Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
| Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
| Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
| Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
| Power(V) | 3 Phase 220V/380V/50HZ | |||||
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 | ||
Straigtening performance:
| tock Thicknees (mm) | Stock Width (mm) | |||
| 0.3 | 400 | 500 | 600 | 800 |
| 0.4 | ||||
| 0.6 | ||||
| 0.8 | ||||
| 1.0 | ||||
| 1.2 | ||||
| 1.4 | ||||
| 1.6 | 470 | 470 | ||
| 1.8 | 400 | 400 | ||
| 2.0 | 360 | 360 | ||
| 2.3 | 300 | 300 | 300 | 300 |
| 2.5 | 230 | 230 | 230 | 230 |
| 2.8 | 150 | 150 | 150 | 150 |
| 3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is
provi
