3 In 1 Decoiler Straightener Feeder Leveling Machine Stamping Production Line

Stamping production line, leveling roller, 3-in-1 feeder leveling machine

The coil material used in the stamping production line will be exposed to dust or debris during storage, transportation and use, and then the flattening roller of the 3 in 1 feeder leveling mechanism will be rolled for a long time.

It is often transferred to the surface of each drum or dropped into the mechanism. Therefore, it is necessary to carry out the cleaning work on the surface and the mechanism of each drum after the leveling operation for a period of time, so that the leveling mechanism can perform smooth rolling and leveling operations.

Thus, the feeder 3 in 1 Ruihui leveling head structure are designed to replace the traditional open bolt fastening, do not need the use of tools for both open leveling operation of the handpiece.

Upon completion of cleaning of dirt and debris within a short time a fast operation, for a long time indeed to maintain leveling accuracy of the material and extend the life and precision of the leveling means, the feeder 3 in 1 reduction and maintenance costs.

When the 3-in-1 feeder is used, the linear actuator of the leveling mechanism is in the retracted position, and the bottom surface of the active rod pressure-reducing support acts as the bottom edge of the movable groove, so that the upper roller group bracket is lowered to fit the lower roller group bracket.

The upper end of the long hole of the inter-section link pushes the lever, and the outer side of the long-hole of the elastic link is moved, and the hook and the hook are elastically relaxed, and the buckle is hooked into the buckled bevel of the buckle block to make the upper roller set The fixed pair covers the lower roller set.

Products:

Specification:
 

Straigtening performance:
 

*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi