Active Member
|
[China]
Address: No. 12, Chuangxing Road, Baisha, Humen Town, Dongguan, Guangdong, China
Contact name:Calin Deng
GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. |
|
|
NC servo feeder, metal sheet stamping processing, automatic feeding equipment
NC servo feeder is the first choice for customers because of its simple operation, high feeding accuracy, low failure rate, and the advantages of air and roller feeders.
At present, there are many manufacturers of domestic feeders, which are often encountered. The difference between the same NC feeders is very large, which brings great trouble to customers.
From the technical requirements:
(1) The type of NC feeder is selected by the thickness of the
material. At present, the NC feeders produced in China are divided
into thin plates 0-2.2mm, medium plates 0-3.2mm, and thick plates
0-4.5mm according to the thickness of the material. Kind, the
thicker the thickness can be achieved, the higher the price.
(2) Select mechanical relaxation and pneumatic relaxation according to the speed and the matching equipment.
(3) Brand and power of servo motor and PLC: The stability and accuracy of NC feeder are not only the machining and assembly quality of the machine itself, but also depend on the servo motor and PLC used by the machine.
(4) End detection: NC feeder is mainly used for continuous stamping production. When feeding to the last material less than one step, if the NC feeder is still feeding automatically, it will easily cause mold damage.
The end detection is when the material is insufficient. Control the feeder to stop automatically.
(5) Selection of man-machine interface: NC feeder has button type, 3.2 inch touch screen type, 7 inch touch screen type, and there are many brands of touch screen. The mainstream is Taiwan Weilun and Japan Mitsubishi, customers can choose according to their own needs.
(6) The appearance of the whole machine.
Products:
Specification:
| Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
| Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
| Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
| Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
| Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
| Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
| Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
| Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
| Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
| Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
| Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
| Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
| Power(V) | 3 Phase 220V/380V/50HZ | |||||
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 | ||
Straigtening performance:
| tock Thicknees (mm) | Stock Width (mm) | |||
| 0.3 | 400 | 500 | 600 | 800 |
| 0.4 | ||||
| 0.6 | ||||
| 0.8 | ||||
| 1.0 | ||||
| 1.2 | ||||
| 1.4 | ||||
| 1.6 | 470 | 470 | ||
| 1.8 | 400 | 400 | ||
| 2.0 | 360 | 360 | ||
| 2.3 | 300 | 300 | 300 | 300 |
| 2.5 | 230 | 230 | 230 | 230 |
| 2.8 | 150 | 150 | 150 | 150 |
| 3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is
provi
