GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. |
|
Air feeder, stamping and feeding equipment, automatic stamping and feeding equipment
The air feeder is the earliest feeding device used in the stamping
industry. Its principle is to use the air source as the power to
clamp the material through the cylinder.
Feeding is carried out by the telescopic stroke of the cylinder,
and the adjustment of the feed length is controlled by the length
of the stroke of the cylinder.
Air feeder advantages: easy to operate, easy to install,
affordable, and can achieve automatic stamping feeding equipment at
the lowest price.
In actual production, it is mainly used for feeding of stamping
products with low precision and fast speed.
Disadvantages of air feeder: easy to damage materials, O-ring wear has an impact on the
feeding accuracy.
The roller feeder is the most widely used feeding device at
present. The principle is that the connecting rod is connected with
the output shaft of the punching machine, and the punching is used
to drive the operation.
The feeding length of the feeding machine is adjusted by adjusting
the yaw amplitude of the eccentric disk.
Advantages of high-speed roller feeder: high feeding accuracy, high
speed, no additional energy supply, and extremely low failure rate.
Disadvantages of high-speed roller feeder: Due to the limited
eccentricity of the eccentric disk, the maximum feeding length can
only reach 300mm, and the feeding step adjustment is inconvenient.
The punching machine needs the output shaft to be installed.
Specifications:
Model | MAC4-600F | MAC4-800F | MAC4-1000F | MAC4-1300F |
Stock Width(mm) | 70~600 | 70~800 | 70~1000 | 70~1300 |
Stock Thickness(mm) | 0.6~6.0 | 0.6~6.0 | 0.6~6.0 | 0.6~6.0 |
Max.Coil Weight(kg) | 5000 | 5000 | 7000 | 10000 |
Max.Coil O.D.(mm) | 1400 | 1400 | 1400 | 1400 |
Coil I.D.(mm) | 508 | 508 | 508 | 508 |
Feed Length(mm) | ~500* | ~500* | ~500* | ~500* |
Max.Line Speed(m/min) | 16~24 | 16~24 | 16~24 | 16~24 |
Work Roll Number(piece) | upper 6/lower 5 | upper 6/lower 5 | upper 6/lower 5 | upper 6/lower 5 |
Feed Roll number(set) | 1 | 1 | 1 | 1 |
Main Motor | AC7.5 | AC11.0 | AC11.0 | AC11.0 |
Mandrel Expansion | Hydrauilc | Hydrauilc | Hydrauilc | Hydrauilc |
Reel Motor(kw) | 2.2 | 2.2 | 3.7 | 7.5 |
Power(v) | 3 Phase 220V/380V/50HZ | |||
Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 |
Straightening Performance:
Model | MAC4-600F | MAC4-800F | MAC4-1000F | MAC4-1300F | |
Stock Thickness (mm) | 0.8~2.3 | 600 | 800 | 1000 | 1300 |
2.8 | 933 | 933 | |||
3.2 | 714 | 714 | 714 | ||
4.0 | 457 | 457 | 457 | 457 | |
4.5 | 361 | 361 | 361 | 361 | |
5.0 | 293 | 293 | 293 | 293 | |
6.0 | 203 | 203 | 203 | 203 |
Products: