GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. |
|
Heavy Material Rack Flattening Feeding Stamping Peripheral Equipment CE ISO Certification
Maintenance of heavy material racks:
1. Check the installation status of the gear transmission system
(such as centering, meshing clearance, foundation fastening), the
matching clearance of the tile and the level of the base of the
external support rocker before the daily operation of the heavy
material frame.
2. Visually inspect the material rack cylinder every week to detect
whether it leaks, whether the pressure and flow of the hydraulic
system are normal, and whether the hydraulic cylinder of the outer
support rocker is working properly.
3. Weekly use the dial gauge to inspect and expand the diameter and
tile vibration of the material rack, and disassemble the reel at the same time, check the wear of the
quadrangular pyramid, the lining plate and the mandrel in the drum,
and timely carry out the condition. Repair or replace.
4. Use the flowmeter to check the grease leakage of the reducer
coupling of the material frame and the flow rate of the lubrication
pump every week, and check the working position of the gearbox
lubricating oil level, flow rate and lubrication pump; add
according to the lubrication situation. lubricating oil.
5. Check the lubrication of the sliding parts of the material frame
and the grease of the coupling pin by visual inspection every week,
and the wear of the tile.
6. Disassemble the rack gear every 6 months, check the tooth
surface wear (check for pitting, peeling, broken teeth, etc.) and
lubrication.
Specifications:
Model | MAC4-600F | MAC4-800F | MAC4-1000F | MAC4-1300F |
Stock Width(mm) | 70~600 | 70~800 | 70~1000 | 70~1300 |
Stock Thickness(mm) | 0.6~6.0 | 0.6~6.0 | 0.6~6.0 | 0.6~6.0 |
Max.Coil Weight(kg) | 5000 | 5000 | 7000 | 10000 |
Max.Coil O.D.(mm) | 1400 | 1400 | 1400 | 1400 |
Coil I.D.(mm) | 508 | 508 | 508 | 508 |
Feed Length(mm) | ~500* | ~500* | ~500* | ~500* |
Max.Line Speed(m/min) | 16~24 | 16~24 | 16~24 | 16~24 |
Work Roll Number(piece) | upper 6/lower 5 | upper 6/lower 5 | upper 6/lower 5 | upper 6/lower 5 |
Feed Roll number(set) | 1 | 1 | 1 | 1 |
Main Motor | AC7.5 | AC11.0 | AC11.0 | AC11.0 |
Mandrel Expansion | Hydrauilc | Hydrauilc | Hydrauilc | Hydrauilc |
Reel Motor(kw) | 2.2 | 2.2 | 3.7 | 7.5 |
Power(v) | 3 Phase 220V/380V/50HZ | |||
Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 |
Straightening Performance:
Model | MAC4-600F | MAC4-800F | MAC4-1000F | MAC4-1300F | |
Stock Thickness (mm) | 0.8~2.3 | 600 | 800 | 1000 | 1300 |
2.8 | 933 | 933 | |||
3.2 | 714 | 714 | 714 | ||
4.0 | 457 | 457 | 457 | 457 | |
4.5 | 361 | 361 | 361 | 361 | |
5.0 | 293 | 293 | 293 | 293 | |
6.0 | 203 | 203 | 203 | 203 |
Products: