Results forcustomizable compression testing machinefrom 71161 Products.
|
IEC60529 IP Code Degrees Ingress Protection IPX1 To IPX8 Test System Product Introduction: The water-proof testing equipment is manufactured in accordance with the standard of ...
|
|
|
|
IEC60335 PLC Control Touch Screen Washing Machine Door Durability Tester Production information: The device is designed and manufactured according to IEC60335-1, IEC60335-2-7 ...
|
|
|
|
IEC61215-2-MQT14.2 Power Cord Torsion Tester For Torque Test After Retention Test. Introduction 1.1 Purpose This machine is mainly used for torque test after retention test. The ...
|
|
|
|
High and low temperature alternating wet heat test chamber Product Introduction: This machine is suitable for examining the moisture resistance of electrical and electronic ...
|
|
|
|
USB Type-C Connectors and Cable Assemblies Compliance - Figure E-3 Reference Wrenching Strength Continuity Test Fixture E Wrenching Strength Test Type-C plugs on cable assemblies ...
|
|
|
|
Three comprehensive environmental test chamber Series of three integrated main chamber for the aerospace, aviation, petroleum, chemical, electronics, communications, and other ...
|
|
|
|
IPX9K High Temperature And High Pressure Jet Test Box Description: For shell protection grade IEC (IP code, strengthen test) of electric products inspection, in accordance with the ...
|
|
|
|
UL 1581 / IEC 60227-2 / IEC 60245-2 Flexible Cable Testing Equipment 1.1 Main purpose This instrument is mainly used to test the mechanical strength of finished flexible cables. It ...
|
|
|
|
40N ± 2N Switch Tester Coupling Implement Shell Pressure Test Device Product Information: This device is according to the IEC60320-1 standard requirement to design. Appliance ...
|
|
|
|
Abet5015AG Power Frequency Spark Tester Description: Suitable for three single twister and cable machine, line to center height of 1 M plus or minus 20% can be adjusted(special ...
|
|
|
|
Temperature and Humidity Walk-in Test Chamber / Walk in Cooling Room Description Temperature and Humidity Walk-in Test Chamber suitable for the whole machine or large parts of low ...
|
|
|
|
Switch And Plug Socket Tester Product Introduction The test machine is designed and manufactured according to IEC60884-1clause 20 and 21 fig 16, IEC60669-1 and etc. It is ...
|
|
|
|
Electronic intelligent door lock aging test stand - intelligent door lock Product overview: This test stand is suitable for the aging test of PCBA main board of electronic ...
|
|
|
|
4 Station Flexing Test Apparatus Instrument Introduction 1.1 Main uses This instrument is mainly used to test the flexural fatigue strength of AC power cords and plug leads. It is ...
|
|
|
|
Load machine KP-FZ012 This load machine is designed and processed in accordance with Table 17 in GB15092.1-2010 and Figure 9a in Chapter 7.1.2.3, and the peak surge current is ...
|
|
|
|
IEC60558-1 Fig 6 Mandrel Tester Device Light Testing Equipment Product information This tester conforms to IEC60558-1 Fig6 and IEC60065 Fig14--16. The test shall be performed by ...
|
|
|
|
Switch Plug Socket Tester Apparatus For Breaking Capacity And Normal Operation Test Products Introduction: This testing machine is according to IEC61058.1,IEC60884 and IEC60669.1 ...
|
|
|
|
ISO20653 High Temperature And Pressure Water Jet Test Chamber IPX9K This device is applied to electrical and electronics, electric appliances, auto parts and other accessories ...
|
|
|
|
Desktop constant temperature and humidity test chamber Tabletop constant temperature and humidity test chamber. Product introduction: This machine is mainly used for small parts ...
|
|
|
|
IEC60851-3 Standard Mandrel Jig Machine Setup High Performance Long Life Use Standard:IEC60851-3 Product usage: Put the dabber on the chuck, then lock Put the test round-wire ...
|
|
|
You may also be interested in :