|
[China]
Trade Verify
Address: BLOCK A,GANLIN INDUSTRY PARK,SHENGZHOU CITY,ZHEJIANG PROVINCE,CHINA
Contact name:Jacky
ZHEJIANG KAIDI REFRIGERATION EQUIPMENT CO.,LTD |
|
Verified Suppliers
|
|
|
Product name: Waterproof IP65 Commercial Coolroom Evaporator Air Cooler For Cold Storage
EHG SERIES COMMERCIAL CELLING GLYCOL UNIT COOLERS
1. Product description:
The EHG series commercial ethylene glycol cooler developed by our company adopts φ 12 copper tubes, cold storage cooling equipment with glycol aqueous solution as refrigerant. The EHG series of air coolers can be used in cold storage at 10℃, 0℃ and -18℃ respectively, mainly for cold storage with medium and small cooling capacity.
This series of products have the following characteristics:
● Casing: high quality galvanized steel plate with silver powder coating (RAL7001), with strong corrosion resistance; The two side plates and the outer water plate adopt the hinged structure, which is convenient and fast to operate.
● Evaporator end plate adopts aluminum plate, effectively protect copper tube, reduce weight.
● Double water plate design: the outer water plate adopts angular structure, smooth drainage, no drainage dead angle; The inner water tray adopts the flume structure of aluminum plate. The condensed water or defrosted water is directly discharged into the outlet of the outer water tray through the inner water tray.
● The long air duct design with integral stretch arc has good air flow effect.
● For fan with diameter of 500, there are floor support feet for easy installation.
● Coil:copper pipe φ12, spacing 38.1×33, triangle arrangement, heat transfer efficiency is high.
● Corrugated aluminum fins with hydrophilic film, fin spacing of 4.0 and 6.0mm to meet the different temperature requirements of cold storage.
● Fan: high-power external rotor fan, operating temperature -30℃~60℃; Fan specifications φ350,φ400,φ500, the formation of different specifications of the product series, users have more choices.
● Defrosting:standard electric heating defrosting, stainless steel heating pipe are distributed on the coil tube fin and inner water plate, has a good defrosting effect.
● IP65 grade waterproof junction box and waterproof connector, the fan and heating pipe adopt independent wire box ,with better waterproof effect, high reliability.
● Strict factory pressure test, test pressure 23bar.
2. Standard configuration and options:
| Parts | Configuration | Parts | Configuration | ||
| Casing | Al-Mg alloy sheet with powder coating | × | Fin | Aluminum fins | ○ |
| sheet with powder coating | ○ | Hydrophilic aluminum fins | ● | ||
| Galvanized sheet with powder coating | ● | Defrost | Air defrosting | ○ | |
| Stainless steel plate* | ○ | Electric heating pipe | ● | ||
| Fan | WEIGUANG motor | ● | Water | × | |
| EBM motor* | ○ | Drainpipe hot wire | ○ | ||
| The wind bucket motor | ○ | Wind duct heating belt | ○ | ||
●:Standard；○:Options；×:Do not choose.
* : Use short side deflector air duct.
3. Technical data sheet:
3.1 Fin spacing 4.0mm
| Model | Glycol 25% T1=-3℃, T2=2℃ Tr=10℃,RH85% | Glycol 34% T1=-10℃, T2=-7℃ Tr=0℃,RH85% | Surface | Tube Volume | Airflow | Airthrow | Connect pipe | Weight | ||||
| Capa. (KW) | Liquid Flow (m3/h) | Capa. (KW) | Liquid Flow (m3/h) | m2 | dm3 | m3/h | m | Inlet | Outlet | Drain | kg | |
| φ350 Fan | ||||||||||||
| EHG351/CL-ET | 2.9 | 0.5 | 2.2 | 0.7 | 10.9 | 2.2 | 2050 | 7 | 16 | 16 | G1" | 36 |
| EHG351/DL-ET | 3.6 | 0.7 | 2.6 | 0.8 | 14.6 | 2.9 | 1850 | 7 | 16 | 16 | G1" | 37 |
| EHG352/CL-ET | 5.9 | 1.1 | 4.4 | 1.4 | 21.9 | 4.0 | 4100 | 9 | 22 | 22 | G1" | 56 |
| EHG352/DL-ET | 7.3 | 1.4 | 5.3 | 1.7 | 29.2 | 5.3 | 3700 | 9 | 22 | 22 | G1" | 59 |
| EHG353/CL-ET | 8.9 | 1.6 | 6.6 | 2.1 | 32.8 | 5.8 | 6150 | 10 | 28 | 28 | G1" | 77 |
| EHG353/DL-ET | 11.0 | 2.0 | 7.8 | 2.5 | 43.8 | 7.8 | 5550 | 10 | 28 | 28 | G1" | 81 |
| EHG354/CL-ET | 11.8 | 2.2 | 8.8 | 2.8 | 43.8 | 7.7 | 8200 | 11 | 28 | 28 | G1" | 98 |
| EHG354/DL-ET | 14.6 | 2.7 | 10.5 | 3.4 | 58.4 | 10.2 | 7400 | 11 | 35 | 35 | G1" | 104 |
| φ400 Fan | ||||||||||||
| EHG401/DL-ET | 6.0 | 1.1 | 4.2 | 1.4 | 23.2 | 4.5 | 3600 | 11 | 22 | 22 | G1" | 47 |
| EHG401/FL-ET | 8.4 | 1.6 | 5.8 | 1.9 | 35.0 | 6.7 | 2950 | 11 | 28 | 28 | G1" | 52 |
| EHG402/DL-ET | 12.1 | 2.3 | 8.4 | 2.7 | 46.7 | 8.4 | 7200 | 12 | 28 | 28 | G1.5" | 77 |
| EHG402/FL-ET | 16.8 | 3.1 | 11.5 | 3.7 | 70.0 | 12.6 | 5900 | 12 | 35 | 35 | G1.5" | 86 |
| EHG403/DL-ET | 18.2 | 3.4 | 12.6 | 4.0 | 70.0 | 12.3 | 10800 | 13 | 35 | 35 | G1.5" | 106 |
| EHG403/FL-ET | 25.2 | 4.7 | 17.3 | 5.6 | 105.0 | 18.4 | 8850 | 13 | 42 | 42 | G1.5" | 120 |
| EHG404/DL-ET | 24.2 | 4.5 | 16.8 | 5.4 | 93.4 | 16.2 | 14400 | 14 | 42 | 42 | G1.5" | 132 |
| EHG404/FL-ET | 33.6 | 6.2 | 23.1 | 7.4 | 140.1 | 24.3 | 11800 | 14 | 50 | 50 | G1.5" | 151 |
| φ500 Fan | ||||||||||||
| EHG501/DL-ET | 10.6 | 2.0 | 7.3 | 2.4 | 39.4 | 7.2 | 6500 | 17 | 28 | 28 | G1.5" | 78 |
| EHG501/FL-ET | 14.7 | 2.7 | 10.0 | 3.2 | 59.1 | 10.8 | 5400 | 16 | 35 | 35 | G1.5" | 86 |
| EHG502/DL-ET | 21.2 | 3.9 | 14.5 | 4.7 | 78.8 | 13.8 | 13000 | 19 | 35 | 35 | G1.5" | 124 |
| EHG502/FL-ET | 29.5 | 5.5 | 20.1 | 6.5 | 118.2 | 20.7 | 10800 | 18 | 42 | 42 | G1.5" | 139 |
| EHG503/DL-ET | 31.9 | 5.9 | 21.9 | 7.0 | 118.2 | 20.4 | 19500 | 21 | 42 | 42 | G2" | 171 |
| EHG503/FL-ET | 44.3 | 8.2 | 30.1 | 9.7 | 177.3 | 30.7 | 16200 | 20 | 50 | 50 | G2" | 194 |
| EHG504/DL-ET | 42.5 | 7.8 | 29.1 | 9.3 | 157.6 | 27.0 | 26000 | 22 | 50 | 50 | G2" | 219 |
| EHG504/FL-ET | 59.1 | 10.9 | 40.2 | 12.9 | 236.4 | 40.6 | 21600 | 21 | 50 | 50 | G2" | 251 |
3.2 Fin spacing 6.0mm
| Model | Glycol 34% T1=-10℃, T2=-7℃ Tr=0℃,RH85% | Glycol 50% T1=-28℃, T2=-25℃ Tr=0℃,RH95% | Surface | Tube Volume | Airflow | Airthrow | Connect pipe | Weight | ||||
| Capa. (KW) | Liquid Flow (m3/h) | Capa. (KW) | Liquid Flow (m3/h) | m2 | dm3 | m3/h | m | Inlet | Outlet | Drain | kg | |
| φ350 Fan | ||||||||||||
| EHG351/CD-ET | 1.8 | 0.6 | 1.6 | 0.6 | 7.5 | 2.2 | 2100 | 8 | 16 | 16 | G1" | 35 |
| EHG351/DD-ET | 2.2 | 0.7 | 2.0 | 0.7 | 10.0 | 2.9 | 1900 | 8 | 16 | 16 | G1" | 37 |
| EHG352/CD-ET | 3.6 | 1.1 | 3.3 | 1.1 | 15.0 | 4.0 | 4200 | 10 | 22 | 22 | G1" | 55 |
| EHG352/DD-ET | 4.4 | 1.4 | 4.0 | 1.4 | 20.0 | 5.3 | 3800 | 10 | 22 | 22 | G1" | 58 |
| EHG353/CD-ET | 5.4 | 1.7 | 5.0 | 1.8 | 22.6 | 5.8 | 6300 | 11 | 28 | 28 | G1" | 75 |
| EHG353/DD-ET | 6.6 | 2.1 | 6.0 | 2.1 | 30.0 | 7.8 | 5700 | 11 | 28 | 28 | G1" | 79 |
| EHG354/CD-ET | 7.2 | 2.3 | 6.6 | 2.3 | 30.0 | 7.7 | 8400 | 12 | 28 | 28 | G1" | 97 |
| EHG354/DD-ET | 8.8 | 2.8 | 8.0 | 2.8 | 40.1 | 10.2 | 7600 | 12 | 35 | 35 | G1" | 102 |
| φ400 Fan | ||||||||||||
| EHG401/DD-ET | 3.5 | 1.2 | 3.2 | 1.2 | 16.1 | 4.5 | 3700 | 12 | 22 | 22 | G1" | 47 |
| EHG401/FD-ET | 5.1 | 1.6 | 4.5 | 1.6 | 24.1 | 6.7 | 3200 | 12 | 28 | 28 | G1" | 51 |
| EHG402/DD-ET | 7.0 | 2.3 | 6.4 | 2.5 | 32.1 | 8.4 | 7400 | 13 | 28 | 28 | G1.5" | 75 |
| EHG402/FD-ET | 10.0 | 3.2 | 9.1 | 3.2 | 48.2 | 12.6 | 6400 | 13 | 35 | 35 | G1.5" | 83 |
| EHG403/DD-ET | 10.6 | 3.4 | 9.6 | 3.4 | 48.2 | 12.3 | 11100 | 14 | 35 | 35 | G1.5" | 104 |
| EHG403/FD-ET | 15.1 | 4.9 | 13.7 | 4.8 | 72.2 | 18.4 | 9600 | 14 | 42 | 42 | G1.5" | 116 |
| EHG404/DD-ET | 14.1 | 4.5 | 12.8 | 4.5 | 64.2 | 16.2 | 14800 | 15 | 42 | 42 | G1.5" | 129 |
| EHG404/FD-ET | 20.2 | 6.5 | 18.2 | 6.4 | 96.3 | 24.3 | 12800 | 15 | 50 | 50 | G1.5" | 145 |
| φ500 Fan | ||||||||||||
| EHG501/DD-ET | 5.9 | 1.9 | 5.4 | 1.9 | 27.1 | 7.2 | 6800 | 18 | 28 | 28 | G1.5" | 77 |
| EHG501/FD-ET | 8.5 | 2.7 | 7.7 | 2.7 | 40.6 | 10.8 | 5800 | 17 | 35 | 35 | G1.5" | 84 |
| EHG502/DD-ET | 11.9 | 3.8 | 10.8 | 3.8 | 54.2 | 13.8 | 13600 | 20 | 35 | 35 | G1.5" | 120 |
| EHG502/FD-ET | 17.1 | 5.5 | 15.4 | 5.4 | 81.3 | 20.7 | 11600 | 19 | 42 | 42 | G1.5" | 134 |
| EHG503/DD-ET | 17.9 | 5.7 | 16.3 | 5.7 | 81.3 | 20.4 | 20400 | 22 | 42 | 42 | G2" | 165 |
| EHG503/FD-ET | 25.5 | 8.2 | 23.1 | 8.1 | 121.9 | 30.7 | 17400 | 21 | 50 | 50 | G2" | 187 |
| EHG504/DD-ET | 23.8 | 7.6 | 21.6 | 7.6 | 108.3 | 27.0 | 27200 | 23 | 50 | 50 | G2" | 212 |
| EHG504/FD-ET | 34.1 | 10.9 | 30.9 | 10.8 | 162.5 | 40.6 | 23200 | 22 | 50 | 50 | G2" | 240 |
In the table, T1 is the inlet temp. of ethylene glycol solution, T2 is the outlet temp., and Tr is the temp. of cold room.
4. Electrical parameter table:
| 型号 | Fan Motor | Electric defrosting | |||||
Voltage (V) | Input (W) | Current (A) | Speed (r/min) | Coil (KW) | Tray (KW) | Total (KW) | |
| EHG351* | 380-3 | 129 | 0.4 | 1400 | 2×0.5 | 1×0.5 | 1.5 |
| EHG352* | 380-3 | 258 | 0.8 | 1400 | 2×0.9 | 1×0.9 | 2.7 |
| EHG353* | 380-3 | 387 | 1.2 | 1400 | 2×1.3 | 1×1.3 | 3.9 |
| EHG354* | 380-3 | 516 | 1.6 | 1400 | 2×1.7 | 1×1.7 | 5.1 |
| EHG401/D* | 380-3 | 205 | 0.51 | 1380 | 3×0.6 | 1×0.6 | 2.4 |
| EHG401/F* | 380-3 | 205 | 0.51 | 1380 | 5×0.6 | 1×0.6 | 3.6 |
| EHG402/D* | 380-3 | 410 | 1.02 | 1380 | 3×1.1 | 1×1.1 | 4.4 |
| EHG402/F* | 380-3 | 410 | 1.02 | 1380 | 5×1.1 | 1×1.1 | 6.6 |
| EHG403/D* | 380-3 | 615 | 1.53 | 1380 | 3×1.6 | 1×1.6 | 6.4 |
| EHG403/F* | 380-3 | 615 | 1.53 | 1380 | 5×1.6 | 1×1.6 | 9.6 |
| EHG404/D* | 380-3 | 820 | 2.04 | 1380 | 3×2.0 | 1×2.0 | 8.0 |
| EHG404/F* | 380-3 | 820 | 2.04 | 1380 | 5×2.0 | 1×2.0 | 12.0 |
| EHG501/D* | 380-3 | 500 | 0.95 | 1380 | 3×0.8 | 2×0.8 | 4.0 |
| EHG501/F* | 380-3 | 500 | 0.95 | 1380 | 5×0.8 | 2×0.8 | 5.6 |
| EHG502/D* | 380-3 | 1000 | 1.9 | 1380 | 3×1.6 | 2×1.6 | 8.0 |
| EHG502/F* | 380-3 | 1000 | 1.9 | 1380 | 5×1.6 | 2×1.6 | 11.2 |
| EHG503/D* | 380-3 | 1500 | 2.85 | 1380 | 3×2.3 | 2×2.3 | 11.5 |
| EHG503/F* | 380-3 | 1500 | 2.85 | 1380 | 5×2.3 | 2×2.3 | 16.1 |
| EHG504/D* | 380-3 | 2000 | 3.8 | 1380 | 3×3.0 | 2×3.0 | 15.0 |
| EHG504/F* | 380-3 | 2000 | 3.8 | 1380 | 5×3.0 | 2×3.0 | 21.0 |
5.How to select correct evaparator:
Generally,Choose evaporator capacity=cold room cooling capacity *1.15
1.When the cold room temperature is around 0℃, select 4.5mm as fin space.
Evaporator choose=1.0*Q0
2.When the cold room temperature is around -18℃, select 6mm as fin space.
Evaparator choose=1.1*Q0
3.When the cold room temperature is around -25℃, select 9mm as fin space.
Evaparator choose=1.27*Q0
Remarks: The water defrost and hot gas defrost type are also optional.
Customized specification leave me message for details.
6.Want to know other related products?-click picture for detailed specification
7.How to assure quality? Any procedure?
Our QC department will make sure of each step
8.Do you factory?
We are factory established in 1995 and through 28years
developed,welcomed by all our customers.Because of all your support
now we are a big family of more than 300 people,covered 50000
square meters,and your supporting is very important of continuing
our dream of eating fresh and healthy food.
9.Do you attend exhibition?
Each year we will attend domestic national and foreign exhibition,also we will support our agent to attend exhibition,welcome to join us.
10.Why choose us
Professional:28 years focus one thing-refrigeration equipments
Material we use sufficient
Certificate:CE, ISO, and cetiifcate of producing special pressure equipment
11.Projects reference?
12.FAQ
1, Q:Where is your factory address?
A:We are factory and located in refrigeration equipment producing base Shengzhou,Zhejiang province.
2, Q: What is your package?
A: Our package comply to custom require not include original wood.
3, Q:What is your MOQ?
A: Ordinary products can order from 1 set.
4, Q: Can you offer sample?
A: Yes,we can offer sample.and cost and delivery at your charge.
5, Q:I can't find products on your list?
A: Please contact me directly.
6,Q:How can i confirm your factory?
A: We have third party verified document of Bureau Veritas report,you can download in company page or leave me message to get.
