Jiangsu Co-effort Mechanical&Electrical Technology Co., Ltd |
Automatic Control Feeding Sheet Metal Decoiler Uncoiling for Steel Thick
Product Appliction
Decoiler is a special equipment for metal plate feeding and discharging. The uneven metal plate can be made up of uncoiling, leveling and shearing production lines according to the relevant configuration. It is applicable to mechanical equipment, vehicles, metal products, household appliances, steel structure, decoration and other industries.
Technical Parameter of Metal Sheet Material Decoiler
No | Technical Parameters | |
1 | Width of Strip | 30-100mm; |
2 | Thickness of Strip | ≤2mm; |
3 | Inner Diameter of Coil | ф480-520 mm(according to customer’s requirements); |
4 | Outer Diameter of Coil | φ1300mm;Loading Weight:≤1T |
5 | Expand Way | Manual |
6 | Power | 3 KW |
Other Material Rack Decoiler Uncoiler Technical Parameters
Material width | stock thickness | Material inside diameter | Material outside diameter | Material Weight | Speed of levling | Motor | Decoil expansion | G.W. | size of machine (m) |
200mm | 0.5-3.0mm | 450-530mm | 1200mm | 800KG | 15M/MIN | 3KW | Manual | 1000KG | 2.0*1.4*1.4 |
300mm | 0.5-3.0mm | 450-530mm | 1200mm | 1000KG | 15M/MIN | 3KW | Manual | 1100KG | 2.1*1.5*1.5 |
400mm | 0.5-3.0mm | 450-530mm | 1200mm | 1200KG | 15M/MIN | 5KW | Manual | 1200KG | 2.2*1.6*1.6 |
500mm | 0.5-3.0mm | 450-530mm | 1200mm | 2000KG | 15M/MIN | 5KW | Manual | 1400KG | 2.3*1.7*1.7 |
600mm | 0.5-3.0mm | 450-530mm | 1200mm | 2500KG | 15M/MIN | 7KW | Manual | 1600KG | 2.4*1.8*1.8 |
700mm | 0.5-3.0mm | 450-530mm | 1200mm | 2500KG | 15M/MIN | 7KW | Manual | 1800KG | 2.5*1.9*1.9 |
Product Application
(1) Automatic operation
The rotation of decoiler uncoiler is controlled by automatic loop
arm. The loop arm controls variable speed operation, providing
smooth stop and start. Variable speed reduced uncoiler.
(2) Safety
Decoiler uncoiler rotation drive system and mandrel expansion power
are fully protected. The pendant control allows automatic rotation
to be disabled during coil loading.
(3) Electrical requirements
According to customer country requirements
(4) Architecture
The structure consists of steel plates and heavy structural
sections. The seam is sealed and welded. Include structural
supports as necessary. The expansion and contraction of the mandrel
are realized by a connecting rod system including bronze bearings.
(5) Decoiler finish
After manufacturing, uncoiler frame shall be machine cleaned and
powder coated before mechanical and electrical assembly.
(6) Coil car options
Can include reels with weights matching the specified uncoiler. The
coil car consists of a "V" shaped surface with a central coil in
motion. The coiler car includes sufficient vertical travel to
contact the lower surface of the mandrel when fully extended. The
power take-up car moves along the rail installed in the base of the
uncoiler. The hydraulic check valve prevents the coil from falling
vertically in case of hydraulic loss.
(7) Installation
Uncoilers and reels can be installed by drilling holes in typical
industrial concrete foundations and concrete expansion bolts.