Active Member
|
[China]
Address: Miangyang
Contact name:Michael zhang
Mianyang Prochema Commercial Co.,Ltd.&GUS Industry (Hongkong) Co,.limited |
|
|
FEP (heat shrink )tube used as All kinds of corrosive medium (harsh solvents) pipeline
Introduction:
FEP shrinktube is made from FEP resin and prepared by the technology of
thermoplastic extrusion and blowing. It has non-sticking,
heat-resistance, aging resistance, corrosive resistance,
non-flammability and good electric property. It can be solid
adhesive for PTFE and also a good adhesive for laminating various
materials. Its working temperature is up to 200 and is an ideal
material for circuit board and flat cable. The shrink ratio is 30%
. (1.3:1)
Usage :
Office-work machine 's roll packing
paper machine's roll packing
printing and dyeing machine's roll packing
printing machineroll packing
insulated jacket
the main insulation of rotor of the electric instrument
water treatment
make the magma sample in the field of oil field ect.
LCD manufacturing plant
Connect body to single-ended luminous tube for single core optical
fiber
Heat exchanger ,Steam piping
High purity reagents duct
All kinds of corrosive medium (harsh solvents) pipeline
Various frequentcy electric wire ,electric cable sheath ,
slot insulation tube(submersible motor wiring harness with slot
insulation pipe, air conditioning components with tube).
Turnkey flourine plastic tube for type O sealing ring
Note: If you need any products of ours, please kindly contact with us
directly by following contaction . Then we can reply you faster and
easy . Thanks
Properties :
High low temperature resistance:
-200--200°C,high temperature strength is 2 times higher than PTFE
Good adhesive and heat sealability with PTFE:
Below melting point ,it won’t stick any project.Above melting point, it has perfect adhesive
property with PTFE, Metal and self-adhesion(heat sealing).
None stick to water ,oil :water contact angle:θ=114o
Electric reliability,High dielectric
60HZ-60MHZ,Under the high and low temperature,the permittivity keeps 2.1 .even if the surface damaged ,it won’t has conductive track.
Volume resistance>1018ΩM
Surface resistance>2*1013Ω
Voltaic Arc Resistance>165sNo electric leakage
Weather resistance:It can be used in sunlight and ozone long
Anti-corrosion:Only in high temperature, Fluorin and alkalis can effect it,others
acid,alkali or ester won’t effect it.
Fireproof :If firing, and will still insulate .
High diaphaneity
UL-Resistance :Good penetrability in ultraviolet radiation,and lowest refraction
coefficient
Technical data of FEP:
| Item | Value | ||
| General purpose | Electric purpose | ||
| Density g/cm3 | 2.12-2.17 | 2.12-2.17 | |
| Temperature range°C | -200 -+200 | -200 -+200 | |
| Longi&tray,shrink rate %≤ | 3.0 | 3.0 | |
| Tensile strength Mpa ≥ | 14 | 14 | |
| Elongation at break %≤ | 175 | 175 | |
| Tear Strength (N/m) ≥ | 4.9x104 | 4.9x104 | |
| Dielectric Constanct (106Hz) | 2.15 | ||
| Dissipation Factor 106Hz≤ | 1x10-3 | ||
| Volume resistance (Ω.m) | 1x1014 | ||
| | 100 | |
| 75 | |||
| 50 | |||
Specification
Dia ø5 --300mm,
Thickness: 0.015mm to 0.75mm.
Length :50mm to unlimited.
Color and sizes can be customiszed .Surface treated can be done (chemical or plasma treated)
Plastic bag &carton . Customized is acceptable
Tube's inside can be treated by sodium. It can be made into shrink
tube and none-shrink tube.
When you inquiry , please tell us your roller's Diameter and
thickness of the tube.
